D-Link DIR-825/AC User Manual page 127

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
with 3G/CDMA/LTE Support and USB Port
User Manual
In the IPv6 DHCP server section, you can enable the DHCPv6 server of the router and select its
operating mode.
Parameter
Enable DHCPv6 Server
DHCP PD
State mode
Start interface IP
End interface IP
Leased Time
When all needed settings are configured, click the Apply button.
Figure 107. The section for configuring the DHCPv6 server.
Select the checkbox to enable the DHCPv6 server of the router.
When the checkbox is selected, the State mode drop-down list and
the Leased Time field are displayed on the page.
Select the checkbox to activate the Prefix Delegation function. When
the checkbox is selected, the router requests a prefix to configure
IPv6 addresses for clients of the LAN from a delegating router.
Select an operating mode of the DHCPv6 server from the drop-down
list.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
Stateful: clients receive IPv6 addresses from the range specified in
the Start interface IP and End interface IP fields.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses leased by the DHCPv6 server. The
field is available for editing, if the DHCP PD checkbox is not
selected.
Page 127 of 220
Configuring via Web-based Interface
Description