Resizing Originals To Fit The Roll Width (Mac Os X) - Canon iPF815 User Manual

8.
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or
Letter (8.5"x11").
9.
C
Select the Enlarged/Reduced Printing check box.
Note
C
• If the
B
the Borderless Printing check box.
10.
E
Click Fit Roll Paper Width.
Note
• After you click
width of the loaded roll in the Roll Paper Width list and click OK.
• Make sure the roll paper width you specify matches the width of the loaded roll.
11.
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)

Resizing Originals to Fit the Roll Width (Mac OS X)

This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: 16 inches (406.4 mm)
iPF815
Enhanced Printing Options
Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear
E
Fit Roll Paper Width, the Information dialog box is displayed. Select the
> Printing enlargements or reductions
Resizing Originals to Fit the Roll Width (Mac OS X)
>
3
"
→P.193
69