New Technologies - Canon PIXMA iP6220D Service Manual

1. NEW TECHNOLOGIES

(1) New Direct Print function
- Red eye correction: The red eyes area is selected from an image, and the red eyes are detected automatically.
- Memory card writing function: From the Menu, Setting of Read only (writing is not possible) and Read_Write
(writing is possible.) is possible.
<Possible problems with this function>
1) Print results is red-tinged. -> Change the correction value. (Shift to Y side.)
2) Direct Print is not possible. -> Release Write setting.
(2) Bluetooth printing support (option)
This printer has the Bluetooth printing function.
Install the optional Blurtooth unit (BU-20) in the printer.
<Possible problems with this function>
Printing is not possible. -> Shorten the communication distance or get rid of obstacles.
(3) Quiet mode
The machine has a quiet mode function.
Compared with the normal mode,
- Acoustic noise level: slightly lower. (HS normal approx. 42.7 dB, Quiet approx. 42.5 dB)
- Audible overtone level: Sound quality changes, and sound becomes quieter.
- Print speed: Slows.
<Possible problems with this function>
1) The operation sound does not become quieter.
=> The audible sound becomes only slightly quieter.
2) Printing is slow.
=> Disable the Quiet mode.
(4) Remaining ink level detection function
The machine has a function to detect the remaining ink level.
<Detection method>
- Dot counting (counted for each Photo / CL ink cartridge)
- The remaining ink level is detected by total counted dot values of 3 colors of ink.
<Display method>
- Displayed on the Status Monitor (at 4 levels listed below for each Photo / CL ink cartridge)
Level 1: Approx. 70% of ink remaining
Level 2: Approx. 40% of ink remaining
Level 3: Indication of "!" mark (Remaining ink level is low)
Level 4: Indication of "X" mark (No ink remaining)
Note: Remaining ink detection function displays the status only, and does not cause errors.
Correction is made at the detected area.
2-1