Sharp ER-A750 Programming Manual page 25

[JOB#922] : MRS=0008 : INLINE PROGRAMMING
AREA
922-A,B: Not used (Fixed at "00")
922-C,D: 1. Programming of the SRN transmission speed and car-
rier-off waiting time
Transmission speed Carier-off waiting time
480 kbps
1 Mbps
[JOB#923] : MRS=0010 : INLINE PROGRAMMING
AREA
923-A,B: 1.The record number for REQUEST of T-LOG POLLING
(x100)
1.The record number for REQUEST of T-LOG
POLLING (x100)
0000 ∼ 9900
923-C: 1.T-log Function
1.T-log Function
923-D: 1.Polling cycle (second)
1.Polling cycle (second)
0 ∼ 9 Sec.
[JOB#924] : MRS=1433 : INLINE PROGRAMMING
AREA
924-A,B,C: Not used (Fixed at "143")
924-D: Programming whether or not to lock REG-mode entries
after individual periodic total resetting when the system has
no save file,
1. Locking after Daily Net resetting
2. Locking after Transaction resetting
1. Locking after Daily 2. Locking after
Net resetting
Yes
No
[JOB#925] : MRS=0303 : INLINE PROGRAMMING
AREA
925-A: Not used (Fixed at "0")
925-B: 1.Various individual resetting
1.Various individual resetting
Disable
Enable
922-CD
3.2 msec 01
6.4 msec 02
9.6 msec 04
12.8 msec 00
1.6 msec 09
3.2 msec 10
4.8 msec 12
6.4 msec 08
923-AB
00-99
923-C
No 0
Yes 1
923-D
0 ∼ 9
924-A
Transaction resetting
Yes 0
No 1
Yes 2
No 3
925-B
2
3
925-C: 1. Report printing when consolidation daily and periodic
total transaction reading or resetting is taken
1.Report printing when consolidation daily and
periodic total transaction reading or resetting is
taken
Printing of both i.e. reports on individual machines
and consolidation report on the entire system
Printing of consolidation report on the entire system
Printing of report on individual register
925-D: 1.Resetting is allowed when the server is remained sign on
2.Resetting in the open store state
1.Resetting is allowed when the
server is remained sign on
No
Yes
[JOB#926] : MRS=0000
926-A: 1.Sending "LAST VOID DATA" on KP
2.Sending "PAST VOID DATA" on KP
1.Sending "LAST VOID
DATA" on KP
Yes
No
926-B: 1.Sending "REFUND DATA" on KP
1.Sending "REFUND DATA" on KP
926-C: 1.Open store / Close store : standalone ECR with on-line
2.Send AT command string with JOB#500
3.Send AT command string with JOB#501
1.Open store /
Close store :
standalone ECR
with on-line
No
Yes
926-D: 1.Reverse On-line channel in close store
1.Reverse On-line channel in close store
– 23 –
2.Resetting in the
open store state
Disable
Enable
Disable
Enable
2.Sending "PAST VOID
DATA" on KP
Yes
No
Yes
No
Yes
No
2.Send AT 3.Send AT
command command
string with string with
JOB#500 JOB#501
No
No
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
No
Yes
925-C
0
1
2
925-D
0
1
2
3
926-A
0
1
2
3
926-B
0
2
926-C
0
1
2
3
4
5
6
7
926-D
0
4