Changing A Program - Electrolux EWF14012 User Manual

16 www.electrolux.com
-
Step 4 - Starting a program
5.2 Interruption Of A Program
- To pause press Start/Pause. The
indicator will start flashing.
- Press the Start/Pause again. The
program will continue.

5.3 Changing A Program

Changing a running program is possible
only by switching off the appliance.
- Press the "On/Off" button to cancel the
program and to turn off the appliance.
- Press the "On/Off" button again to start
the appliance. Now, you can set a new
washing program.
If you wish to carry out the
"Prewash" phase, pour it into
the compartment marked
To start a program, press the
Start/Pause ( ) touchpad, the
corresponding pilot light will stop
flashing and a default program
duration will be displayed on the
screen.
-
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the "MAX" mark in the
drawer).
.
-
Close the drawer gently.
After approx. 15 minutes from
the start of a program:
- The appliance will automatically
adjust the selected program
duration according to the type
and size of the load.
-
The display will show adjusted
program duration.
The appliance will not drain the
water.
5.4 Changing The Options
It is possible to change only some
option after the program has
started.
1. Press the touchpad Start/Pause.
The indicator will start flashing.
2. Change the options.
3. Press Start/Pause again. The
program will continue.