JVC GY-HM600U Instructions Manual page 113

Rec Mode
For selecting the record mode for recording to
0
the SD card.
(A P77 [Special Recording] )
The selectable options vary according to the
0
[Record Format] menu settings.
No. of Frames for
Format
Frame & Bit Rate
MP4 30p, 25p, 24p
(MPEG2)
QuickTime
(MPEG2)
60p, 60i, 50p, 50i Normal, Pre
AVCHD 60p, 60i, 50p, 50i Normal, Pre
QuickTime 60p, 60i, 50p, 50i Normal, Pre
(H.264)
30p, 25p, 24p
Memo :
When [Slot Mode] is set to "Backup", this item is
0
fixed at "Normal".
[Variable Frame Rate] is enabled when
0
[Resolution] is set to "1920x1080" or "1280x720",
and [Frame & Bit Rate] is set to "30p(HQ)",
"24p(HQ)", or "25p(HQ)".
9 Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to "Pre Rec".
[Setting Values: R5sec, 10sec, 15sec]
Memo :
0
Setting values
Normal, Pre
Rec, Clip
Continuous, 9 Rec Frames
Interval Rec,
For setting the number of frames to record when
Frame Rec,
[Rec Mode] is set to "Frame Rec" or "Interval Rec".
Variable Frame
[Setting Values: R1frame, 3frames, 6frames]
9 Rec Interval
Rec, Clip
Continuous,
For setting the recording time interval when [Rec
Interval Rec,
Mode] is set to "Interval Rec".
Frame Rec
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
Rec, Interval
9 Variable Frame Rate
Rec, Frame Rec
For setting the frame rate during recording when
Rec, Clip [Rec Mode] is set to "Variable Frame".
Continuous,
The available options vary according to the [Record
Interval Rec,
Format] B [Resolution] and [Frame & Bit Rate]
Frame Rec
settings.
Normal, Pre
Rec, Clip
Continuous,
Slot Mode
Interval Rec,
For setting the operation of the card slot.
Frame Rec,
0
Variable Frame
0
0
When the frame rate setting in [Main Menu] B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is set to "XHQ", "15sec"
cannot be selected.
(A P81 [Variable Frame Rec] )
Series:
Mode that activates the two slots sequentially.
Dual:
Mode that activates the two slots at the same
time.
(A P73 [Dual Rec] )
Backup:
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to "Normal".
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] button that is assigned with "Backup
Trig".
(A P75 [Backup Rec] )
113