Table of Contents
Advertisement
Caution! The condensed water is not
suitable for drinking or for preparing
foodstuffs.
If the programme has been interrupted as
a result of the water reservoir being full:
Press the Start/Pause button to continue the
drying cycle.
Cleaning condenser
Important!
• Never operate the dryer without condenser.
• Clogged condenser cause higher energy
consumption (drying cycle elongation) and
dryer damage.
What to do if ...
Troubleshooting by yourself
1)
Problem
Dryer not connected to mains supply.
Dryer does not
work.
Loading door opened.
The START PAUSE button not pressed.
Incorrect programme set.
Unsatisfactory
Fluff filters clogged.
drying results.
Heat exchanger clogged.
www.zanussi.com
Possible cause
• Do not use sharp objects to clean.
6
Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside of
the drum. The degree to which the laundry has
been dried is then no longer detected reliably.
The laundry is damper than expected when re-
moved from the appliance.
Use a standard domestic cleaner (e.g. vinegar-
based cleaner) to wipe down the inside of the
drum and drum ribs.
Clean control panel and housing
Caution! Do not use furniture cleaners or
aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the control
panel and housing.
Plug in at mains socket. Check fuse in fuse
box (domestic installation).
Close loading door
Press the START PAUSE button.
Set suitable programme.
Clean fluff filters.
Clean heat exchanger.
7
Remedy
2)
3)
3)
11
Hide quick links:
Advertisement
Table of Contents
