NEC Univerge SV8500 Reference Sheet page 2

TOGGLE CALL
Allows users to toggle between calls.
Press TRANSFER key (this puts the first
call on hold and provides you with dial
nd
tone to call the 2 party).
nd
Dial required 2 number.
Press TRANSFER key each time you
wish to toggle between the parties.
When finished with one party, hang up
on them and the telephone will ring and
connect you to the other party.
CALLBACK
If you dial a busy extension.
Press CALL BACK (CB) soft
Key or dial Access code____.
Replace Handset.
During this time you may make and receive
calls.
When both extensions are free,
your phone will ring
Lift handset or press Speaker
and the other extension will ring.
To Cancel
Lift handset and press CALL
BACK (CB) soft key or dial
Access code_____.
CALL FORWARD - ALL
Forwards all calls immediately.
To Set
Lift Handset and press FDA
Key or Dial Access code_____
Dial destination number.
Replace Handset.
To Cancel
,
Lift handset, press FDA key or
dial Access Code _____.
CALL FORWARD NO ANSWER
Forwards calls only after 4 – 6 rings.
To Set
Lift Handset and press FDN Key
or Dial Access code________.
Dial destination number.
Replace Handset.
To Cancel
Lift handset, press FDN key, or
dial Access Code _______.
CALL FORWARD BUSY
Forwards calls when your extension is busy.
To Set
Lift Handset and press FDB Key or
Dial Access code_____
Dial destination number.
Replace Handset.
To Cancel
Lift handset, press FDB key, or dial
Access Code _____.
LOGIN/LOGOUT
For IP Phones only.
To Login
Enter Login code and press SET Soft key.
Enter password and press OK Soft key.
To Logout
Press LOGOUT key. (Display will show
LOGOUT?)
Press LOGOUT key again and wait a
few seconds for handset to logout.
CALL PICK UP
To answer a ringing extension in y our
group:
Lift handset and press PICK Soft key or
dial Access Code______.
For ringing extensions not in your group:
Lift handset, dial Access Code ______
plus ringing extension number.
VOICECALL
Allows a user to intercom other Digital
handsets.
Lift handset and dial extension number.
Press VOICE Soft key and speak over
the intercom.
PROGRAMMING SPEED NUMBERS
To Store Numbers using One-Touch Keys:
Press Feature button.
Press an available One-Touch
Speed Calling key.
Enter either extension number or
external number including 0 for an
outside line.
Press Feature button.
To Access
Press desired One-Touch Speed
Calling key or press Speaker and
One-Touch Speed Calling key to call
number.
SET MESSAGE KEY
To Set
Press Feature button.
Press Message key.
Dial Voice Mail System access
Code__________
Press Feature button.
To Access:
Press Message button.
Hear ringback tone.
DISPLAY
To adjust the Display:
Press the Up Down button up or down
while the phone is idle.
SPEAKER/RECEIVER VOLUME
To adjust the Speaker/Receiver Volume:
Press the Up Down button up or down during
conversation
RINGER VOLUME
To adjust the Ringing Volume:
Press the Up Down button up or down during
ringing.
NDA-31134
Issue 1.01