Motorola LI2208 Quick Start Manual

LI2208 LINEAR IMAGER
QUICK START GUIDE
See Product Reference Guide
http://www.motorolasolutions.com/LI2208
for detailed information
SCANNER FEATURES
1
2
1

Scan Window

2 Scan Trigger
3 LED
4 Beeper
STEP 1 - CONNECT HOST INTERFACE
USB
NOTE: Cables may vary depending on configuration
RS-232
Keyboard Wedge
IBM 46XX
2
ABOUT 123Scan
123Scan is an easy-to-use, PC-based software tool
2
that enables rapid and easy customized setup of
a scanner via a bar code or USB cable.
For more information,
visit: http://www.motorolasolutions.com/123Scan.
SET DEFAULTS / ENTER KEY BAR CODES
SET DEFAULTS
RETURN TO FACTORY DEFAULTS
ADD AN ENTER KEY
(Carriage Return/Line Feed)
To add an Enter key after scanned data, scan
the bar code below.
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
PRESENTATION MODE
3
4
STEP 2 - SET UP INTERFACE
USB
Scan ONE of the bar codes below
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
*USB KEYBOARD (HID)
IBM TABLE TOP USB
SNAPI WITHOUT IMAGING
RS-232
Scan ONE of the bar codes below
The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.
*STANDARD RS-232
NIXDORF RS-232 MODE A
Keyboard Wedge
Scan a bar code below
The Auto-Host Detect Cable feature automatically detects the host interface type
and uses the default setting. If the default (*) does not meet your requirements,
scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.
*IBM AT NOTEBOOK
IBM 46XX
Scan ONE of the bar codes below
The Auto-Host Detect Cable feature automatically detects the host interface type,
but there is no default setting. Scan one of the bar codes below to select the
appropriate port.
NON-IBM SCANNER EMULATION (PORT 5B)
123
S
UTILITY FUNCTIONALITY
- Device Configuration
- Electronic Programming (USB Cable)
- Programming Bar Code(s)
- Data View – Scan Log (Display Scanned Bar Code Data)
( )
Scan Host Bar Codes
USB CDC Host
IBM HAND-HELD USB
ICL RS-232
IBM PC/AT and IBM PC COMPATIBLE
HAND-HELD SCANNER EMULATION (PORT 9B)
2
can
TAB KEY BAR CODE
ADD A TAB KEY
To add a Tab key after scanned data, scan
the bar code below.
ADD A TAB KEY
USB CAPS LOCK OVERRIDE BAR CODE
USB - OVERRIDE CAPS LOCK KEY (ENABLE)
*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)
IBM OPOS (IBM HAND-HELD USB with FULL SCAN ENABLE)
SIMPLE COM PORT EMULATION
TOSHIBA TEC Host
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
TABLE-TOP SCANNER EMULATION (PORT 17)
- Access Asset Tracking Information
- Upgrade Firmware and View Release Notes
- Remote Management (SMS Package Generation)