Panasonic HX-A1M Operating Instructions Manual page 38

When connecting to the Main Camera for the first time:
The Wi-Fi lamp flashes (green) fast. When the connection is complete, the Wi-Fi lamp will light
green and you will hear an alert sound.
≥ Main Camera information (SSID, etc.) will be saved to this unit.
When connecting for the second time or later:
The Wi-Fi lamp will flash green, and this unit will connect to the Main Camera using the Main
Camera information that was saved to it.
When the connection is complete, the Wi-Fi lamp will light green and you will hear an alert sound.
The image transmitted from this unit appears on the Sub Window of the Main Camera.
∫ To terminate the connection to the Main Camera
Press and hold the recording mode/Wi-Fi button for approximately 2 seconds, and remove your
finger.
≥ The Wi-Fi lamp will go off.
∫ To connect to another Main Camera
In Step 3, while the Wi-Fi lamp is flashing green, press and hold the recording mode/Wi-Fi button for
approximately 5 seconds.
≥ The Wi-Fi lamp will flash fast (in green).
When the connection is complete, the Wi-Fi lamp will light green and you will hear an alert sound.
≥ Main Camera information (SSID, etc.) will be overwritten.
≥ A connection cannot be established while this unit is recording.
≥ When using this unit as a Wireless Sub Camera, you can neither record images with this unit nor
change the recording mode.
- 38 -