1.2.7 Adjust Lever
The adjust lever , located at the left and upper side of the printer , is used to adjust the gap between the
paper and platen. The adjust lever must be set to the proper position the paper type in order to prevent
the paper from smudging.
Cut sheet
Transparency
Continuous paper
Index card
Envelopes
Rev. A
Table 1-12. Adjust Lever Position
Paper
Type
Far side (0)
Near side (+)
+
Figure 1-6. Adjust Lever Settings
Lever
Platen Gap Adjustment
Position
Adjust lever
0
Product Description
Value
0 mm
+ 0.7 mm
1-11