Step 7: Install The Application And Log Into The Appliance Gui - Motorola AirDefence Installation Manual

6. Type the user name, and then press
7. Type , and then press
admin
8. Type a password, press
9. Type , press
q
10. Type , press
q
automatically reboot AirDefense.
CAUTION

3.7 Step 7: Install the Application and Log into the Appliance GUI

Steps from this point on do not occur on the Server. Use a workstation with internet connectivity.
NOTE
1. Launch a browser and navigate to one of the following:
https://<server_ip_address>:8543
•
https://<server_name>:8543
•
The thin client login page displays. It includes both Windows and Linux installers.
.
Enter
, type it again to confirm, and then press
Enter
twice.
Enter
, and then type
Enter q
AirDefense automatically reboots when you exit the Command Line
Interface. Do not just close the SSH client. Instead, continue typing
q, until you quit the Command Line Interface entirely. The AirDefense
server automatically reboots and the new settings take effect.
In order to run the Enterprise GUI, a minimum of 512MB of RAM is
required and 1GB of RAM is recommended for the client
workstation.
.
Enter
again to quit the Command Line Interface and
Installation Steps
.
Enter
13