Overview; Using The Snc Toolbox; Starting Snc Toolbox; How To Use Snc Toolbox - Sony Ipela Application Manual

Overview

This instruction manual is for application software, such
as the SNC toolbox.
Note
Some function described in this manual may not be
displayed, depending on the function of the connected
camera.

Using the SNC toolbox

Explains the functions in SNC toolbox.
To install SNC toolbox, see "Installing SNC toolbox" on
page 21.
Notes
• SNC toolbox may not operate correctly if you use a
personal firewall or antivirus software in your
computer. In this case, disable the software.
• If you are using Windows XP Service Pack 2 or later,
Windows Vista, Windows 7 or Windows 8, disable
Windows Firewall. Otherwise SNC toolbox will not
operate correctly. To set Windows Firewall see:
"Configuring Windows Firewall" in "When using
Windows Vista" on page 27, or "Configuring
Windows Firewall" in "When using Windows 7" on
page 28, or "Configuring Windows Firewall" in
"When using Windows 8" on page 30.
• The model on sale in China does not support the SSL
function.
• To perform SSL communication with a camera,
configure the settings of SNC toolbox.
To configure the settings when registering in My
device, see "Registering in My device" on page 8.
To configure the settings for each device, see "Modify
Device Entry" in "How to use SNC toolbox" on
page 3.
To configure the settings for multiple devices at the
same time, see "Network tab" in "Setting SNC
toolbox options" on page 11.

Starting SNC toolbox

If you are using Windows XP, Windows Vista or
Windows 7, select All Programs from Windows Start
menu, then select SNC toolbox and SNC toolbox in
sequence.
If you are using Windows 8, right-click the mouse on the
Start screen, then select All apps from the application
bar displayed at the bottom of the screen. Select SNC
toolbox from the application list displayed on the Apps
screen.
SNC toolbox starts.
The main screen appears. SNC toolbox detects device(s)
connected to the local network and displays the list.
When you are using Windows Vista, message "User
Account Control – An unidentified program wants
access to your computer" may appear. In this case, click
Allow.

How to use SNC toolbox

Menu bar

Function buttons
Device tree display
Device list
Menu bar
All functions can be selected from here.
File (F) menu
Import: Reads the Device list file (CSV format).
Export: Outputs the Device list in a CSV format file.
Close: Exits SNC toolbox.
Edit (E) menu
Cut: Cuts off a device or folder.
Copy: Copies a device or folder.
Paste: Pastes a device or folder.
Select All: Selects all devices in the Device list.
Add Folder: Creates a folder.
Add Device Entry: Manually registers a device.
Modify Device Entry: Edits the device information.
Remove: Removes a device from a folder.
Delete: Deletes a device or folder.
View (V) menu
Status Bar: Switches show/hide of status at the bottom
of the screen.
Normal: Displays detailed information on a device.
Snapshot small: Displays detailed information on a
device with a small thumbnail.
View button
3
Using the SNC toolbox