• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
On-Screen Displays and Data Code
You can turn most on-screen displays on or off.
Operating modes:
Repeatedly press
following sequence:
mode:
• All displays on
• Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the histogram and information icons)
• All displays off
* Pressing
cally but will not remove onscreen displays that were turned on manually (for
example, onscreen markers, the audio level meter or the joystick guide).
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code
(date/time of recording, information about the camera setup, etc.). In
mode, this information is displayed on the bottom bar and as
information icons; in
displayed with the
Downloaded From VideoCamera-Manual.com Manuals
DISP.
DISP.
will turn off most of the icons and displays that appears automati-
to turn the on-screen displays on/off in the
mode, you can select the information to be
[Data Code] setting.
67
Video