Pre-Recording Function - Canon Legria FS20 Instruction Manual

Video
camcorder (
files again.

Pre-recording Function

The camcorder will start recording 3
seconds before you press
ensuring you do not miss important
shooting opportunities. This is
especially useful when it is difficult to
predict when to start recording.
1
Push the joystick (
the joystick guide.
2
Select ( ) [Pre REC
press .
• appears.
• Press
recording off.
3
Press Start/Stop
The recording will include the 3
seconds before
pressed.
NOTES
• While pre-recording is on, all operational
sounds will be turned off.
• The camcorder will not record the full
3 seconds if any of the following
operations are not performed before
3 seconds have elapsed.
Downloaded From VideoCamera-Manual.com Manuals
46
45) and transfer the
Start/Stop
(
) to display
] and
again to turn pre-
to begin recording.
Start/Stop
was
- Turning on pre-recording
- Exiting standby mode
- Stopping a recording
• Pre-recording will be turned off when
any of the following operations are
performed.
- Opening the FUNC. menu or setup
menus
- Leaving the camcorder without any
operation for 5 minutes
,
- Changing the operating mode
- Turning on Video Snapshot
- Setting the camcorder to standby
mode
23)
Self Timer
FUNC.
[ MENU]
[ CAMERA SETUP]
[SELF TIMER]
FUNC.
appears.
mode:
In record pause mode, press
Start/Stop
The camcorder starts recording after a
10-second countdown*. The
countdown appears on the screen.
mode:
PHOTO
Press
activate the autofocus and then fully.
The camcorder will record the photo
after a 10-second countdown*. The
countdown appears on the screen.
[ON ]
.
, first halfway to
( 23)