Specifications - Makita HP2050 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Speed
Capacities
No load speed (min
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Concrete
Steel
Wood
-1
)
with household
equipment and
environmentally compatible
HP2050/HP2050F
High
20 mm
8 mm 13 mm
25 mm 40 mm
0 - 2,900 0 - 1,200
0 - 58,000 0 - 24,000
362 mm
2.5 kg
END201-5
Noise
The typical
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
waste
Vibration
The vibration
determined according to EN60745:
its
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 3 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE039-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
ENF002-2
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
2
HP2051/HP2051F
Low High
----- 20 mm
8 mm
25 mm
0 - 2,900
0 - 58,000
/II
A-weighted noise
) : 97 dB (A)
pA
) : 108 dB (A)
WA
Wear ear protection
total value (tri-axial
) : 13 m/s
h,ID
2
) : 2.5 m/s
h,D
2
Low
-----
13 mm
40 mm
0 - 1,200
0 - 24,000
360 mm
2.5 kg
ENG905-1
level determined
ENG900-1
vector sum)
2
2
or less
ENG901-1