Attaching The Scanned Data To E-Mail Using The Operation Panel Of The Machine - Canon MB2000 series Online Manual

Attaching the Scanned Data to E-mail Using the Operation Panel of
the Machine
Before attaching scanned data to an e-mail, confirm the following:
• MP Drivers are installed.
If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our
website.
• The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the
sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
• The mail software and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog Box
1. Make sure that the machine is turned on.
2. Select
LCD and Operation Panel
The screen for selecting to which you save the data is displayed.
3. Select
4. Use the
button.
Select Local (USB) for a USB-connected computer, or select the computer to forward the scanned data
for a network-connected computer.
Downloaded from ManualsPrinter.com Manuals
Scan on the HOME screen.
Attach to E-mail, then press the OK button.
button to select the computer to forward the scanned data, then press the OK
745