Setting The Serial Number - Brother HL-2250DN Service Manual

1.2

Setting the serial number

<Procedures>
(1) Open the front cover, and turn the power supply of the printer on while pressing down
the [Go] button. Make sure that the Toner/Drum/Error LED light up.
(2) Release the [Go] button, and then make sure that all LEDs light off.
(3) Press the [Go] button for over 2 seconds, and the Error LED light up. And then the
printer goes into the PIT3 mode.
(4) Double-click the "brmainte.exe" file (maintenance utility) which has been copied in the
"hl2200" folder to start.
(5) Select Input Information from Menu.
(6) Select the applicable model name.
(7) Check the port (USB) which the printer is connected through.
(8) Click "Serial No." in the lower box. Enter the serial number (the fifteen digits) of the
printer into the box at the right hand side, and click the [OK] button.
The serial number is shown in the window, and check that it is correct. Click the [OK]
button after checking
Memo :
• Refer to "SERIAL NUMBERING SYSTEM
serial number of the printer.
in APPENDIX 1" to know how to read the
4-3
Confidential