Windows 2008 R2 Environment; Procedure For Installing The Driver For Windows 2008 R2 - Hitachi CN7741-Y Instruction Manual

Windows 2008 R2 environment

When connecting the LAN cable to the network interface connector, the
drivers bundled in the Windows 2008 R2 cannot be used.
When CN7741-Y or CN7741-R LAN Card is added, be sure to apply the
driver in the "Drivers Kit ****-10-**" CD. (* is an arbitrary number). If
the driver is preinstalled as a factory expanded model, it is not
necessary to install.

Procedure for installing the driver for Windows 2008 R2

When using this LAN Card, install the network driver for the Windows 2008 R2.
This is the installation procedure for updating the driver, provided that
Windows 2008 R2 is already installed.
1. Log in with the user name having the administration authority (such as
Administrator).
2. Click Hardware of Control Panel and then click Device Manager of
Devices and Printers. In the Device Manager window, double-click
Ethernet Controller under Other devices.
3. The Property window opens. Click the Driver tab and then click Update
Driver.
5-2 Installing a driver
PCI-Express Quad Port Gigabit LAN Card Instruction Manual