I/O description
1.
AUX/SPDIF 3.5 mm connector
2.
Micro USB connector for charging (5V/1A)
3.
Standby/Reset button
Standby state: Press the button for 0.5 to 1 second, then release it. To
•
wake up the device, press the button again.
Reset state: Press the button for 4 to10 seconds, then release it.
•
LED indications
Rapidly flashing blue/green: Power on
•
Rapidly flashing blue: Entering reset mode
•
Slowly flashing green: Not connected to the home network; reset
•
mode*
•
Solid green: Connected to the home network
Solid blue: Reset mode
•
LED off: Standby mode
•
NOTE: * You can see R100 labeled as Allplay_xxxxxx_AJ on your list of
available Wi-Fi networks.
Clique R100 User Guide
5