Pioneer Serato DJ CDJ-2000nexus Connection Manual page 3

Using Multi Players
as Serato DJ Controllers
Switch on the power to all units once the connections have been made. Then, set up the Multi Players in
accordance with the following procedures.
1
When using the CDJ-2000, press and hold the [MENU] button on the either model for at least one
second to advance to [UTILITY] mode. Select [ADVANCED] for the [HID SETTING] using the rotary
selector and then press [MENU] button to exit [UTILITY] mode. This action is not required when using
the CDJ-2000nexus.
2
Press the [LINK] button on the Multi Player and then select [USB MIDI] for the [CONTROL MODE].
Press the rotary selector to set the parameter. The Multi Player is now recognized by the Serato DJ.
3
When [DECK:1?] is displayed on the Multi Player's main display area, select the deck to be controlled,
from 1 to 4, by rotating the rotary selector. The parameters are set by pressing the rotary selector.
4
Set the virtual deck in Serato DJ to Internal mode (INT).
3