Sanyo DP19649 Service Manual page 7

3. POWER UNIT AND MAIN BOARD REMOVAL
3.1 Remove 4 screws (A) to take off the power unit.
3.2 Remove 4 screws (A) to take off the main board.
3.3 Remove 1 screw (A) to take off the Key SW board with the button parts off.
4. MOUNTING BRACKET REMOVAL
Remove 11 screws (3X10) to take off the mouniting bracket.
5. LCD PANEL REMOVAL
Take the LCD panel off.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under "Servicing Electrostatically Sensitive Devices,"
on page two in this service literature.
Power Unit
Key SW
A
A
Board
A
A
A
A
A
Main Board
A
A
A
A
Mounting Bracket
A
– 7 –
A