Error Associated With Ink - Epson PP-1002 User Manual

Power BUSY ERROR

Error Associated with Ink

Power BUSY ERROR
118
Lights
STACKER
INK
1 2 3
Lights
STACKER
INK
1 2 3
Conditions/Remedies
4
Stacker 3 is full.
Remove published discs from Stacker 3.
Only for PP-100II/PP-100/PP-100AP
Stacker 4 is full.
Remove published discs from Stacker 4.
Only for PP-100II/PP-100/PP-100AP
Stacker 4 is open.
Close Stacker 4.
Conditions/Remedies
4
Ink low
Prepare a new ink cartridge. Use of Epson brand
ink cartridges is recommended.
The ink has reached its replacement time or it is
not installed correctly.
Replace the ink cartridge or reinstall it. (See
"How to Replace the Ink Cartridges" on page
82.)
If the ink cartridge is not recognized even if it is
installed correctly, there may be dirt on the
green circuit board. Wipe it with soft cloth and
install it again.
The product will stop operation before ink is
completely empty in order to maintain print
head quality. Therefore, some ink will be left in
the ink cartridge. Use of Epson brand ink
cartridges is recommended.