Table of Contents
Advertisement
touching a metallic part such as a door knob, or wear cotton gloves.
Otherwise, static electricity may damage the equipment.
Mounting this product
Mount and use this product in a system unit that supports installation and
operation of this product. If mounted in any other system, this product
causes a failure due to difference in connection specifications. For
information about which system units support this product, see the manual
of the individual system unit.
Precautions Marks in This Manual
Not used in this manual.
Signal cables
■ Lay the cables carefully to prevent your foot from being snagged by
them. If you stumble over the cable, it may cause personal injury or
malfunction of the connection devices. Also it may cause the data to be
lost.
■ Do not put something heavy on the cable. Do not lay the cable near a
heater. The cable coating may be damaged which may cause a failure of
the connected equipment. See page 4-2 Connecting a LAN cable.
Laser beam
On this product, a Class 1 laser defined by IEC60825-1 product is
installed. Do not look directly at the laser beam. Do not look at the laser
beam using an optical device.
Under the laser module cover, a laser beam is being emitted.
Do not remove the cover of an unused card.
Not used in this manual.
NOTICE
xvi
PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual
Safety guidelines
Advertisement
Table of Contents
