Fujitsu SE700 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Server
  5. SE700
  6. Operating manual

Fujitsu SE700 Operating Manual

Hide thumbs Also See for SE700:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, User Manual
English
FUJITSU Server BS2000
SE700 / SE500 / SE300
Additive Components
Operating Manual
Edition June 2015

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu SE700

Summary of Contents for Fujitsu SE700

  • Page 1 English FUJITSU Server BS2000 SE700 / SE500 / SE300 Additive Components Operating Manual Edition June 2015...

  • Page 2: Copyright And Trademarks

    Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright and Trademarks Copyright © 2015 Fujitsu Technology Solutions GmbH. All rights reserved. Delivery subject to availability; right of technical modifications reserved. All hardware and software names used are trademarks of their respective manufacturers.

  • Page 3: Table Of Contents

    Contents Introduction ........5 Application Unit .
  • Page 4 Contents ETERNUS LT40 S2 tape library ......34 4.2.1 Front panel ........36 4.2.2 Rear panel .

  • Page 5: Introduction

    A high-speed, server-internal infrastructure to connect the components with each other and with the customer LAN or SAN. The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules, describes the features and hardware components of the FUJITSU Server BS2000 of the SE Series.
  • Page 6 U41861-J-Z126-1-76...

  • Page 7: Application Unit

    2 Application Unit In addition to the Server Unit, up to 20 autonomous high-end x86-64 servers, which are known as Application Units, can also be installed and operated in the rack of the SE server. Application Units are particularly suitable for important corporate applications. They offer a high degree of data security and availability through highly-developed hardware and software components.
  • Page 8 Application Unit Application Units are integrated into the service concept of the SE server, e.g. into remote service via the MU and into administration with the SE Manager. The following functions are offered for Application Units in the SE Manager: Status display of the Application Unit ●...

  • Page 9: Application Unit Au47

    6 TB and offer ten PCI express slots. Detailed information on the various hardware components and interfaces of the Application Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product site for the relevant server at http://www.fujitsu.com/uk: Go to Products →...

  • Page 10: Front Of The Application Unit

    Application Unit AU47 Application Unit 2.1.1 Front of the Application Unit Figure 1: Server Unit (front) 1 ID card (green) 5 Video port 2 ServerView Local Service Display 6 3x USB ports 3 Optical drive activity indicator 7 HDD indicators; 8 slots for 2.5"...
  • Page 11 Application Unit Application Unit AU47 Figure 2: Front - Detailed view: Operator control panel ID button / ID indicator 3x USB ports Reset button Video port NMI button HDD/SSD activity indicator On/Off button / Status indicator Global error indicator Status indicator (power cable CSS indicator connected) ID card...

  • Page 12: Controls

    Application Unit AU47 Application Unit 2.1.1.1 Controls Identification (ID) button Lights up (blue) on the front and on the rear of the server when the ID button is pressed. The two ID indicators are synchronized. On/Off switch When the Application Unit is switched off, it is switched on again by pressing the On/Off switch once.

  • Page 13: Indicators On The Operator Control Panel

    Application Unit Application Unit AU47 2.1.1.2 Indicators on the operator control panel ID indicator (blue) Lights up blue when the Application Unit has been selected by pressing the ID button. To deactivate, press the button again. The ID indicator can also be activated via the ServerView Operations Manager and the iRMC Web interface, and the status is reported to the ServerView Operations Manager and the iRMC.

  • Page 14: Indicators On The Operable Drives/Components

    Application Unit AU47 Application Unit Global error indicator (yellow) Lights up yellow when a prefailure event was detected which requires Customer Support to become active (by way of precaution). Flashes yellow when an error was detected which requires Customer Support to become active.

  • Page 15: Hard Disks

    Application Unit Application Unit AU47 2.1.1.4 Hard disks Figure 3: Indicators on a hot-plug HDD module 1 HDD BUSY (green) – Lights up: HDD in active phase (drive active, access to drive) – Does not light up: HDD inactive 2 HDD FAULT (orange) –...
  • Page 16 Application Unit AU47 Application Unit SSD indicator Figure 4: Indicators on the SSD drives LED green BUSY – Lights up: SSD in active phase – Does not light up: SSD inactive LED orange FAULT (orange) (in conjunction with a RAID controller) –...

  • Page 17: Rear Of The Application Unit

    Application Unit Application Unit AU47 2.1.2 Rear of the Application Unit Global error indicator and CSS indicator Figure 5: Global error indicator and CSS indicator, ID button and ID indicator U41861-J-Z126-1-76...
  • Page 18 Application Unit AU47 Application Unit 1 CSS indicator (yellow) – Lights up yellow when a prefailure event was detected which requires Customer Support to become active (by way of precaution). – Flashes yellow when an error was detected which requires Customer Support to become active.
  • Page 19 Application Unit Application Unit AU47 LAN ports SYS2 SYS1 Figure 6: LAN ports on the Application Unit 1 LAN link/transfer Lights up green if a LAN connection exists. (System LAN port SYS1 Does not light up if no LAN connection exists. or SYS2) Flashes green when a LAN transfer is in progress.
  • Page 20 Application Unit AU47 Application Unit Indicators on the power supply units Figure 7: Indicators on the power supply units Power supply unit fault indicator and Lights up amber when a critical event occurs warning indicator (power supply unit switches off). Call Customer Support.
  • Page 21 Application Unit Application Unit AU47 Assignment of the PCIe slots (System LAN ports) SYS1 SYS2 Figure 8: Principle of PCIe slot assignment at the rear of the device The figure shows the PCIe slots of the AU: – S1 is equipped with a 4-port LAN controller. –...

  • Page 22: Switching An Application Unit On/Off

    2.3 Operating system and other software Application Units are supplied with the software ordered and are configured by Customer Support.. If you require further software, please contact the Fujitsu Technology Solutions Sales department. You will find information on how to install software and how to configure Application Unit in the “Operation and Administration”...

  • Page 23: System Operation

    2.4 System operation Server management is implemented using the ServerView Operations Manager supplied and the PDA (Prefailure Detection and Analysis) technology from Fujitsu Technology Solutions. PDA reports the threat of a system error or overload at an early stage, allowing preventive measures to be taken.
  • Page 24 Application Unit AU47 Application Unit U41861-J-Z126-1-76...

  • Page 25: Port Extension (Net Unit)

    3 Port extension (Net Unit) A redundantly designed Net Unit can be enhanced with a port extension. In this case two redundant switches supplement the existing ports of the Net Unit to provide up to 96 redundant LAN ports. The switches ICX6450-24 and -48 of the "base" Net Unit are connected to those of the port extension with an FC cable.
  • Page 26 U41861-J-Z126-1-76...

  • Page 27: Periphery

    4 Periphery The following peripherals can be operated on the SE server: ETERNUS DX disk storage system ● http://www.fujitsu.com/uk: Go to Support → Computing Products → Storage → ETERNUS and select ETERNUS Ê ETERNUS CS tape storage virtualization system ●...

  • Page 28: Eternus Jx40 Disk Storage System

    When mirroring is used, the net capacity of the disks is lower. For details, please refer to the description of FUJITSU at http://www.fujitsu.com/uk: Select Computing Products → Storage → ETERNUS JX→ ETERNUS JX40.

  • Page 29: Indicator Elements (Front)

    Periphery ETERNUS JX40 disk storage system 4.1.1 Indicator elements (front) The status LEDs of the disk storage system and the status indicators of the disk drives are visible at the front of the ETERNUS JX40 disk storage system. Further controls which are reserved for Customer Support are provided behind the (removable) cover.
  • Page 30 ETERNUS JX40 disk storage system Periphery CAUTION! The subsystem does not switch off automatically in the case of overheating in order to allow the the connected server to be shut down properly. Overheating is reported in the BS2000 console window and also results in a Remote Service call. Status LEDs of the hard disk drives Figure 11: Status LEDs of the hard disk drives Color...

  • Page 31: Operating And Indicator Elements (Rear)

    Periphery ETERNUS JX40 disk storage system 4.1.2 Operating and indicator elements (rear) You can see the status LEDs of the SAS I/O module and the status LEDs of the power supply units on the rear side of the ETERNUS JX40 subsystem. Status LEDs of the SAS expander unit SAS-OUT(Widelink) SAS-OUT...

  • Page 32: Problem Solutions And Tips

    ETERNUS JX40 disk storage system Periphery The status LEDs of the SAS I/O module are located in the upper part of the device. Color Status Meaning UNIT ID LED Blue Blinking Identification Identification status SAS OUT LED / SAS IN LED Green Link up Link/Fault...
  • Page 33 Periphery ETERNUS JX40 disk storage system Fault status LED When the fault status LED lights up during ongoing operation, this means that a fault has been detected. Please notify Customer Support. Ê Status LED of the hard disk drive does not light up Please notify Customer Support.

  • Page 34: Eternus Lt40 S2 Tape Library

    ETERNUS LT40 S2 tape library Periphery 4.2 ETERNUS LT40 S2 tape library The ETERNUS LT40 S2 tape library is a compact, high-performance and low-cost device for mounting in a rack for the purpose of simple and automatic data backup. It is available for the SE server in two variants: ETERNUS LT40 S2 with FC or SAS connection and one or two half-height LTO-5 drives ●...
  • Page 35 Periphery ETERNUS LT40 S2 tape library Maximum storage capacity and data transfer rate Characteristic Data ETERNUS LT40 S2 tape library (FC or SAS variant) with LTO-5 drive Maximum storage capacity Uncompressed: 1500 GB per MTC (18/36 TB in total) (12/24 tape cartridges) Compressed: 3000 GB per MTC (36/72 TB in total, 2:1 compression) Maximum Write/Read rate...

  • Page 36: Front Panel

    ETERNUS LT40 S2 tape library Periphery 4.2.1 Front panel The power button, operator control panel (OCP), magazines and LEDs are located on the front of the tape library. The operator panel consists of an LCD screen, 4 push button switches and a power on/off button.

  • Page 37: Rear Panel

    Periphery ETERNUS LT40 S2 tape library 10 Control key buttons CANCEL and ENTER. The cancel button is used to cancel a user action and return to the last OCP menu item. The enter button is used to go to a sub menu or execute an action. 4.2.2 Rear panel The rear panel of the tape library provides access to the SAS or Fibre Channel (FC) connector, tape drives, the power connector, LAN, and to the serial and USB port.

  • Page 38: Operating The Tape Library

    ETERNUS LT40 S2 tape library Periphery 4.2.3 Operating the tape library This section contains information on operating the tape library. 4.2.3.1 Operating panel on the device The tape library is by default operated via the Operator Control Panel (OCP). The LCD display of the OCP shows the tape library’s operating status and actions (e.g. “Loading”, “Rewinding”...
  • Page 39 Periphery ETERNUS LT40 S2 tape library Power-up display When the tape library powers up after pressing th power button, or resets, it goes through several internally controlled processes that allows it to get initialized and running. These processes are called Power-On-Self-Test (POST). While the POST is happening, the LCD screen shall have appropriate information displayed to keep the user informed.
  • Page 40 You will find the menu tree overview in other languages in the language options of the "ETERNUS LT40 S2 Quick Start Guide" available for downloading from the following website: http://www.fujitsu.com/uk: Go to Support → Computing Products → Storage → ETERNUS, select ETERNUS LT40 Ê...
  • Page 41 Periphery ETERNUS LT40 S2 tape library Figure 15: OCP menu flowcharts U41861-J-Z126-1-76...

  • Page 42: Remote Management Unit (Rmu)

    ETERNUS LT40 S2 tape library Periphery Actions via the OCP Some actions can be executed on the tape library using the OCP (and also via the RMU): Opening a mailslot (menu Commands > Open Mailslot) ● Unlocking a magazine (menu Commands > Unlock Magazines) ●...
  • Page 43 The functionality of the RMU is described in detail in the “ETERNUS LT40 S2 / LT60 S2” manual. You can download the manual at the address https://support.ts.fujitsu.com Go to Support → Computing Products → Storage → Manuals and select ETERNUS LT40 S2 Ê...
  • Page 44 ETERNUS LT40 S2 tape library Periphery Changing the password of the access account You can change the password of the user account you used to log in on the RMU (e.g. by replacing the default password with a new password): Select Configuration >...

  • Page 45: Magazines

    Periphery ETERNUS LT40 S2 tape library 4.2.4 Magazines Cartridges are stored in the slots of the magazines. Up to 12 cartridges can be stored in each magazine. Magazines may be removed and inserted individually. The tape library has two removable magazines with an installation height of two height units.

  • Page 46: Removing And Replacing A Magazine Using The Rmu

    ETERNUS LT40 S2 tape library Periphery 4.2.4.2 Removing and replacing a magazine using the RMU To log on, enter the correct password and press the ENTER key. Ê Select Operations > Magazines. Ê In the next menu you can select the left or right magazine. Click Release.
  • Page 47 Periphery ETERNUS LT40 S2 tape library The tables below show the numbering of the slots (including the mailslots) when the cartridges or their labels are viewed: Mailslot 3: cleaning cartridge Slot 7 Slot 8 Slot 9 (used for auto cleaning Mailslot 2: I/E port (BS2000) (drive 2 Slot 4 Slot 5...

  • Page 48: Lto Tape Cartridges

    LTO-6 drives support LTO-4 (read only), LTO-5 and LTO6 magnetic tape cartridges. Cleaning cartridges Only use the cleaning cartridges from Fujitsu Technology Solutions. The use of other cartridges may result in the LTO drive malfunctioning. Using and maintaining tape cartridges...
  • Page 49 Periphery ETERNUS LT40 S2 tape library Errors encountered while using the tape (to determine if the tape is faulty). ● CAUTION! The misuse and misunderstanding of barcode technology can result in backup and restore failures. To ensure that your barcodes meet manufacturers' quality standards, always purchase them from an approved supplier and never print barcode labels yourself.

  • Page 50: Working With The Tape Library

    ETERNUS LT40 S2 tape library Periphery 4.2.6 Working with the tape library This section contains hardware-related information on working with the tape library when it is used as a BS2000 device. Cartridges without a label which are contained in the cartridge magazine are not displayed by BS2000.

  • Page 51: Device Settings

    Periphery ETERNUS LT40 S2 tape library 4.2.6.2 Device settings The device settings are defined by Customer Support. The sections below provide infor- mation on how you can change these settings. If you wish to make any changes to the configuration, you should consult Customer Support, who will ensure that the functionality of the device is retained in BS2000 operation.
  • Page 52 ETERNUS LT40 S2 tape library Periphery Enable the Random option in Library Mode. Ê Enable the mailslot. Ê Enable auto cleaning. Ê Click Refresh to activate the changes. Ê When two drives are operating in Sequential Mode, you are recommended not to enable the Autoload and Loop options, see the note on page To guarantee BS2000 operation, you may not change the following configuration settings:...
  • Page 53 Periphery ETERNUS LT40 S2 tape library Logical partitioning From the BS2000 viewpoint, a tape library with two drives looks like two separate devices; it is “logically partitioned” in X2000. This partitioning is performed automatically and cannot be configured. The slots are assigned to the devices as evenly as possible, the last (second) drive possibly being assigned one slot more.
  • Page 54 ETERNUS LT40 S2 tape library Periphery When the other drive fails, the first logical device can be used again. However, here it ● must be borne in mind that the next time the tape emulation is assigned ( /ATTACH- command) the second device cannot be recognized and therefore performs no DEVICE partitioning.

  • Page 55: Error Handling

    Periphery ETERNUS LT40 S2 tape library 4.2.7 Error handling Problem Solution Power supply No display messages – Make sure the power is connected. appear – Make sure the power switch is on. – Power cycle the library. – Contact Customer Support. Tape movement Tape stuck in drive –...

  • Page 56: Removing Stuck Tapes From Slots

    ETERNUS LT40 S2 tape library Periphery Problem Solution "!" in OCP inventory display See “Media” on page There is an error code on Contact Customer Support the LCD screen (see section “Tape library error codes” on page 60). Bad performance –...
  • Page 57 Periphery ETERNUS LT40 S2 tape library 2. The finger holes on the back side of the magazines (see figure) allow the user to pull the cartridges out of the slot. Remove and insert the cartridge mechanically. Repeat the process several times. Figure 17: Removing stuck tapes from slot 3.
  • Page 58 ETERNUS LT40 S2 tape library Periphery Figure 18: Access holes for the left and right magazine Right magazine release Left magazine release 3. To manually release the magazines, push the end of a straightened paper clip into the access hole for each magazine at the back of the library. While holding the paper clip, have a second person pull the magazine out of the front of the unit.
  • Page 59 Periphery ETERNUS LT40 S2 tape library Figure 19: Remove the left magazine Step Process Insert pin into access hole Release and remove magazine If there are additional tapes still in the library, or if you were unable to manually remove the magazines and drive, contact Customer Support for further instructions.

  • Page 60: Tape Library Error Codes

    ETERNUS LT40 S2 tape library Periphery 4.2.7.2 Tape library error codes If an error occurs during operation of the library, the library stops the current operation and displays an error code on the LCD screen. If an error message is issued, please notify Customer Support. Example error code EVENT -6 A5 F1...

  • Page 61: Related Publications

    Related publications You will find the manuals on the internet at http://manuals.ts.fujitsu.com. You can order printed versions of manuals which are displayed with the order number. FUJITSU Server BS2000 SE700 / SE500 / SE300 Basic Operating Manual FUJITSU Server BS2000...
  • Page 62 Related publications U41861-J-Z126-1-76...

  • Page 63: Index

    Index Application Unit 7, ID button 12, on the SE server ID indicator 13, software identification status 29, switching on/off LTO tape cartridge barcode magazine cleaning cartridge 47, mailslot CSS indicator Net Unit, port extension data cartridge NMI button data sheet database On/Off switch operating status...
  • Page 64 Index SAS status Sequential Mode SQ Manager and Application Units status LED switching on system board tape library ETERNUS LT40 S2 write protection XenVM U41861-J-Z126-1-76...

This manual is also suitable for:

Se300Se500Bs2000

Table of Contents