Frigidaire 2970792 Use & Care Manual page 7

FIRST STEPS
Door Removal
If door must be removed, unplug the unit.
1. Gently lay freezer on its back, on a rug or
blanket.
2. Remove two base screws and base panel.
Remove wire from clips on bottom of cabinet
if required.
3. Unplug connector, if required, by holding the
cabinet connector in place, and pulling door
connector out.
4. Remove bottom hinge screws.
5. Remove plastic top hinge cover.
6. Remove screws from top hinge.
7. Remove top hinge from cabinet.
8. Remove door and bottom hinge from cabinet.
9. To replace door , reverse the above order and securely
tighten all screws to prevent hinge slippage.
Base
Panel
6
(upright models)
Base Panel
Screws
HingeScrews
Wire
DoorConnector
Clips
CabinetConnector
Lid Removal
(chest models)
See lid removal instructions on the back of
the cabinet.