Digital Indoor Antenna Assembly - GE 24763 User Manual

UL Listed
Power
Adapter
Antenna Assembly:
1. Remove contents from the box
2. Attach the stand to the back of the antenna
until the cable is flush with the bottom of the
stand
4. Remove the protective film from the face of
the antenna
Note: Antenna may also be mounted to a wall using the
keyholes on the back of the antenna.
Digital Indoor Antenna
Antenna
Stand
i. Be sure the coax cable is
positioned between the stand and
the back of the antenna
ii. Slide the stand into the slots on
the back of the antenna until the
bottom of the stand is flush with the
bottom of the antenna
iii. Push the coax cable into the
channel on the bottom of the stand
In-Line Amplifier
3