Making An External Call; Answering A Call; Making An Internal Call; Conference Call - NEC SL1100 Quick Start Manual

Making an External Call

Lift Handset or press the SPEAKER key for a dial
tone. Then dial 0 for next available line and dial the
number.

Making an Internal Call

Lift Handset or press the SPEAKER key for a dial
tone. Then dial the extension number of the person
you would like to call.
Alternatively press the pre-programmed extension
key.
Note: If you dial 1 following an extension number
the phone will go into hands free mode.
Transferring a Call- Screened
Press the TRANSFER key while on a call then dial
the extension number or the external number (with
a 0 before the number).
Alternatively when on a call press TRANSFER
then the pre-programmed extension key.
You can then announce the call and hang up to
complete the transfer.
To cancel the transfer simply press the flashing
LINE KEY which has the held call.
Transferring a Call- Unscreened
Press the TRANSFER key while on a call then dial
the extension number or the external number (with
a 0 before the number).
Alternatively when on a call press TRANSFER
then the pre-programmed extension key.
Hang up to complete the transfer.
Transferring to Busy Extension
Press the TRANSFER key while on a call then dial
the extension number.
Alternatively when on a call press TRANSFER
then the pre-programmed extension key.
If you receive a busy tone press the TRF soft key
and hang-up. The call will go through to the
extension when they hang-up their call.
Setting Camp-on
Dial the Extension you want to call
If you receive a busy tone press # key and hang-up
The system will alert you when the extension has
hung up. To clear the Camp-On press the EXIT
button then CLBK and then YES.

Answering a Call

If phone is ringing then you can pick up handset or
press SPEAKER button.
Or Press flashing LINE KEY.
To Put a Call on Hold
When you're on a call press the HOLD button, the
held Line key then flashes.
To Retrieve Held Call
Lift hand set or press SPEAKER.
Press held LINE KEY.

Conference Call

While on a call press the MORE soft key then press
the CONF soft key then dial either the extension
number or the external number (with a 0 before the
number) to add to the conference. Wait for an
answer, then press ADD to add the caller to the
conference or press RLS to release the caller.
Repeat for additional participants. Press BEGIN to
start the conference.
If the participant does not answer press CNCL to
cancel the call and press the green flashing LINE
KEY to get the original caller back
NOTE: Conference allows for 32 ports of
Conferencing - 16 Parties at one time, therefore 2 x
16 parties conferences. Any party may exit the
conference by hanging up. The two parties will
remain connected, as long as one of the remaining
parties is internal.

Parking a Call

While call in progress, press HOLD then dial # 6
followed by the Call Park code (01-64), or the press
Call Park Key.
Restore handset.
To retrieve a Parked call
Press SPEAKER then dial * 6 followed by the Call
Park code (01-64), or the press Call Park Key.
Mute
Press MUTE button to switch off your microphone
(Light on).
Press MUTE button to switch on the microphone
(Light off).
Call Pickup (Group)
2