ABB -free home System Manual page 24

04 Commissioning
Allocating devices to rooms (Fig. 18, Fig. 19)
During the next step the devices connected to the system
must be identified, i.e. they are allocated to a room ac-
cording to their function and are given a descriptive name.
In chapter 6 you will find a complete list of all applications
that could appear here (depending on the devices that are
actually connected to the system).
The "Add device" bar displays only those devices / func-
tions that are actually connected to the system, and only
until the devices have been moved on the floor plan via
drag-and-drop. This means that the list keeps getting
shorter as the devices are being positioned.
» In the "Add devices" bar select the desired application
and pull it via drag-and-drop into the floor plan
(Fig. 18).
» A pop-up window opens automatically which lists all
the devices that are connected to the bus and suitable
for the selected application (e.g. all blind actuators, if
the blind application has been selected (Fig. 19).
24 │
ABB-free@home
System Manual
®