Advertisement
Available languages
Available languages
Left Side burner
[]
Remove plastic packaging from side burner valve. Remove side burner grate from within side burner
shelf.
[]
Connect flat igniter wire tip to the igniter pin on the side burner valve. (A & B)
[]
Remove the 2 pre-installed screws from the valve control stem and set them aside. (C)
[]
Loosen the side burner to insert gas valve. To loosen, remove the two screws on front bracket, and
loosen the rear bracket screws halfway. (D&E)
[]
Insert the gas valve into the side burner (F), and insert the valve control stem through the hole in shelf
fascia. (I)
[]
Replace side burner front bracket and tighten in place with 2 previously removed screws. (G)
Tighten screws on back bracket. (H)
[]
Attach bezel to fascia and valve control stem with the 2 previously removed valve control stem
screws. (I)
[]
Pushcontrol knob onto side burner valve stem. (J) Replace side burner grate. (K)
[]
Connect the round igniter wire tip to the pin on the white electrode protruding from the bottom of the
side burner shelf. (L)
24 ° 33577-41500319
Advertisement
