Table of Contents
Advertisement
Setting Up and Getting Started with your HTD52ODV
Check that you have all the accessories, then put
the batteries in the remote control.
Connect the DVD Receiver to your TV, then
connect the supplied power cord.
Connect
the other
end to the
video wtput
of the DVD receiver.
Connect
the power
cord
to the AC inlet.
Switch
on your TV and set it to
correct
video
input.
Connect each speaker as shown below.
Twist and pull off the
Connect
one end to the DVD
receiver.
Match
the colored
wire with the color-coded
label (above
the tabs),
then
insert
the colored
wire into
the red (+) tab and the other
wire with the black (-) tab.
Playing DVDs and CDs.
.%.
For the best surround sound, setup your
speakers like this. The front left and right
speakers should be about 6-9 feet apart.
Front right
Many DVD discs have menus from which you can
choose from.
For detailed instructions,
see the Operating Instructions
supplied and / or contact one of our knowledgeable Pioneer Customer Service Representatives at 1 - (800) 421-1404.
Specifications and design subjected to modification
without notice.
Advertisement
Table of Contents
