Sanyo DVD-SL33 Instruction Manual page 9

Frame by Frame Advance Playback [DVD] [VCD]
Press the k PAUSE/STEP button during play. Each time the button is
pressed, the picture advances one frame.
Press the a PLAY button to return to normal play.
Note:
- The sound is muted.
- Frame playback is operated forward only.
Picture Zoom (Pin Point Zoom) [DVD]
1. Press the ZOOM button during normal, slow or still play. The pin
point guide screen appears.
1 2 3
4 5 6
7 8 9
If you quit the screen, press the ZOOM button.
2. To select the point, do one of the following:
Press the 4, a, 5 or b button, then the ENT, or press the number
button to select the zoom point.
The screen is magnified. "
If necessary, press the 4, a, 5 or b button repeatedly to move
the screen.
3. Press the ZOOM button again. The screen is magnified more
than " 1". " 2" appears briefly.
4. Press the ZOOM button to return to the original screen.
Note:
Picture zoom may not work no some discs.
Viewing from a Desired Camera Angle (Multi-Angle)
[DVD]
Some DVD video discs may contain scenes which have been shot
simultaneously from a number of different camera angles. The jacket
or case of discs that are recorded with angles will be marked.
Example:
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the ANGLE button repeatedly until the desired angle appears.
Example:
Angle Replay [DVD]
During Multi-angle playback screen, press the ANGLE REPLAY button.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues playback. (If desired,
press the button again.)
1" appears briefly on the screen.
Repeat Playback
Press the REPEAT button during playback (or programmed playback)
of the title (or track) you want repeat.
Each time the button is pressed, the repeat mode will be changed as
follows.
TV screen Display
[DVD]
Chapter REP 1
Title REP ALL
Off
[VCD] [CD]
1 REP 1
All REP ALL
Off
During Programmed Playback
Program 1 REP 1
Program All REP ALL
Off
Designated Range Repeat Playback
(A-B Repeat)
1. Press the A-B REPEAT button during playback at the beginning of
the section you want to repeat (Point A). "
TV screen. " A " appears on the FL display.
2. Press the A-B REPEAT button again at the end of the section you
want to repeat (Point B). "A -B " remains lit on the display.
The section between points A and B is played repeatedly.
3. To return to normal playback, press the A-B REPEAT button again.
Note:
Repeat playback or A-B repeat playback mode may not work correctly
with some discs.
Notes on using Video CD with PBC
To use the repeat play or A-B repeat play mode, select PBC off play
mode as follows.
In the stop mode, press the number button(s) to select the track num-
ber then press the a PLAY button.
Random play [CD]
1. Press the PROGRAM/RANDOM button once in the stop mode.
"Random" appears on the screen.
2. Press the a PLAY button to begin random play. "RND" appears on
the display. The unit will automatically select tracks at random.
Note:
The A-B REPEAT and SEARCH MODE button do not work during ran-
dom play.
Operarion
Repeat of chapter being played
Repeat all title being played
Normal playback mode
Repeat of track being played
Repeat all tracks
Normal playback mode
Repeat the programmed track
being playback
Repeat all programmed tracks
Original programmed playback
mode
A-" appears on the
8