Run-On Function "5 ¢15; Cooktop Lighting I - Miele DA 6290 W Operating And Installation Instructions

Operation
Run-on function "5 ¢15"
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering odours in the
air, whether you are using air extraction
or recirculation mode.
The fan can be set to switch off
automatically after either 5 or 15
minutes.
^ After cooking has finished, touch the
run-on option sensor 5 ¢15 whilst the
fan is still running –
– Once: The fan will switch off
after 5 minutes (5 ¢ lights up).
– Twice: The fan will switch off
after 15 minutes (¢15 lights up).
If you press the run-on control 5 ¢15
again, the fan remains on (5 ¢15 goes
out).
To switch the fan off s
^ Press the On/Off sensor s to switch
the fan off.
The s symbol will flash.
16

Cooktop lighting I

To switch the cooktop lighting on
The cooktop lighting can be switched
on and off independently of the fan.
^ Touch the cooktop lighting sensor I
briefly.
The I symbol lights up.
The cooktop lighting will switch on at
maximum brightness.
To dim the cooktop lighting
The brightness of the lighting can be
adjusted.
^ With the cooktop lighting switched
on, touch and hold the cooktop
lighting sensor n.
The brightness will gradually dim until
you release the sensor.
^ To increase the brightness, touch
and hold the cooktop lighting sensor
n again to the level required, then
release it.
If you keep your finger on the cooktop
lighting sensor n, the lighting will
continue to change between bright and
dim.
To switch the cooktop lighting off
^ Touch the cooktop lighting sensor I
briefly.
The I symbol will go out.