Table of Contents
Advertisement
20
www.aeg.com
Problem
There are stains and dry water
drops on glasses and dishes.
The dishes are wet.
Refer to "Hints and tips" for
other possible causes.
13. TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the
hot water supply to decrease energy consumption.
14. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
Possible solution
• The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.
• The programme does not have a drying phase or has
a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
bar (minimum and maximum)
MPa (minimum and maximum)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
.
*
596 / 818-898 / 550
220 - 240
50
0.5 - 8
0.05 - 0.8
max 60 °C
2)
15
0.99
0.10
marked with the symbol
household waste. Return the product to
your local recycling facility or contact
your municipal office.
with the
Advertisement
Table of Contents
