Photo Playback Menu - Silvercrest SCA 5.00 A1 User Manual

SilverCrest SCA 5.00 A1
process, the playback control buttons will be shown. They allow
fast forward or rewind of the video, as described on page 153.
3. To finish playback, press the confirmation button (7).
Volume
This function allows you to set the video playback volume.
1. Perform steps 1 to 4 from "Video Playback Menu" (see page
162).
2. Select "Volume" and press the confirmation button (7) to
confirm.
3. Use the navigation buttons (10) or the  /  buttons on the
display to select the desired sound volume.
You can choose from volume levels between 1 (low) and 10
(high). If you keep pressing the  button after the value 1 has
been reached, a Mute icon will appear and the sound output is
disabled.
4. Press the confirmation button (7) or tap on the OK button to
apply the selected sound volume.
5. Press the Menu button (13) to return to the video playback
menu.

Photo Playback Menu

1. Open the display and then rotate it according to your needs.
The device powers on automatically.
2. If the current mode is not set to photo capture, select it by using
the mode selector (6).
3. Press the playback button (14) to switch to photo playback
mode.
4. Press the menu button (13) or tap on the bottom of the screen
to display the menu.
5. Press the  or  navigation button (10) to select the desired
function and then press the confirmation button (7) or tap on it
on the display to open it.
The Menus
English - 165