What To Do If; Remedying Small Malfunctions - AEG LAVAMAT 64810 User Information

Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the
folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display dur-
ing operation:
– E10 (Problems with water inlet),
– E20 (Problems with water drainage),
– E40 (door open),
please have a look at the following table.
When the fault is remedied, press the START/PAUSE button.
In the event of other faults (E plus a number or a letter): Switch the
appliance off and on again. Re-set the programme. Press the START/
PAUSE button.
If the fault is displayed again, please contact the Customer Care De-
partment and inform them of the fault code.
Problem
Washing machine does
not work.
Door cannot be closed.
When a button is
pressed, Err appears in
the multi-display.
E40 appears.
END display flashes 4x,
at the same time an
acoustic signal sounds
4x.
Possible cause
Mains plug not plugged in
or fuse not working.
Door not closed properly.
START/PAUSE button was
not pressed for long
enough.
Child safety device engaged. Release child safety device.
The selected function can-
not be combined with the
programme set.
Door is not closed properly.
Remedy
Plug in mains plug. Check
fuse.
Close door – there should be
an audible click.
Press START/PAUSE button
for longer.
Make another selection.
Close door properly. Start
programme again.
19