Using Optional Equipment; Cd/Md Changer; Auxiliary Audio Equipment; Rotary Commander Rm-X4S - Sony CDX-GT660US Operating Instructions Manual

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
Skipping albums and discs
1 During playback, press (1)/(2) (GP/ALBM –
/+).
Press (1)/(2) (GP/ALBM –/
To skip
+)
album and release (hold for a
moment).
album within 2 seconds of first
continuously releasing.
discs repeatedly.
discs then, press again within 2
continuously seconds and hold.
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select To play
DISC*
1 disc repeatedly.
SHUF tracks in the changer in random
CHANGER* 1 order.
SHUF ALL* 2 tracks in all units in random
order.
*1 When one or more CD/MD changers are
connected.
*2 When two or more MD changers are connected.
To return to normal play mode, select "
or "SHUF OFF."
12

Auxiliary audio equipment

You can connect optional Sony portable devices
to the BUS AUDIO IN/AUX IN terminal on the
unit. If the changer or other device is not
connected to the terminal, the unit allows you to
listen to the portable device on your car speakers.
Note
When connecting a portable device, be sure BUS
CONTROL IN is not connected. If a device is
connected to BUS CONTROL IN, "AUX" cannot be
selected with (SOURCE).
Tip
When connecting both a portable device and a
changer, use the optional AUX-IN selector.
Selecting auxiliary equipment
1 Press (SOURCE) repeatedly until "AUX"
appears.
Operate by the portable device itself.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
"AUX REAR IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until "AUX"
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
OFF"
D S P L
SE L
M O D E
M O D E
D SP L S E L