Adjusting The Throttle Cable - Yamaha 2004 Rhino 660 YXR660FAS Service Manual

ADJUSTING THE IDLING SPEED/

ADJUSTING THE THROTTLE CABLE

a
3
7. Detach:
• tachometer
8. Lower the cargo bed.
9. Install:
• console
• passenger seat
• driver seat
Refer to "SEATS, ENCLOSURE, HOOD
AND CARGO BED" in chapter 8.
ADJUSTING THE THROTTLE CABLE
NOTE:
_
Throttle cable free play should be adjusted
properly before adjusting the engine idling
speed.
1. Remove:
• driver seat
• passenger seat
• console
2. Remove:
• throttle valve cover 1
3. Check:
• throttle cable a
Slack → Remove the slack.
4. Adjust:
• throttle cable
M MMM M MMM M M MMM M
a. Loosen the locknut 1.
b. Turn the adjuster 2 in or out until there is
no slack.
Turning in
Turning out
c. Tighten the locknut.
NOTE:
_
After adjusting the throttle cable, depress the
accelerator pedal a few times and make sure
that the throttle valve 3 closes completely
after releasing the accelerator pedal.
L LLL L LLL L L LLL L
3 - 7
CHK
ADJ
M MMM M M MMM M M MMM M
Slack is increased.
Slack is decreased.
L LLL L L LLL L L LLL L
MMM
LLL