Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
1 Set the zebra display pattern.
Select the display pattern in [LCD/VF] B
[Shooting Assist] B [Zebra].
2 Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in [LCD/VF] B [Shooting
Assist] B [Zebra] B [Top] and [Bottom].
Item
Settings
Top
Upper luminance
limit for displaying
[Zebra]
Bottom
Lower luminance
limit for displaying
[Zebra]
3 Display the zebra pattern.
Press the [ZEBRA/5] button to display the zebra
pattern in the specified range.
Memo :
"Zebra" is assigned to [ZEBRA/5] button in
0
factory default.
"Zebra" can also be assigned to other user
0
buttons.
(A P38 [Assigning Functions to User Buttons] )
ZEBRA/5
Options
5% - 100%, Over
(in 5 % increments)
0% - 100% (in 5 %
increments)
69