1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV
  5. MW27FPX
  6. Service manual

Toshiba MW27FPX Service Manual

Color television/ video cassette recorder/ dvd video player
Hide thumbs Also See for MW27FPX:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
FILE NO. 140-200424

SERVICE MANUAL

COLOR TELEVISION/
VIDEO CASSETTE RECORDER/
DVD VIDEO PLAYER
MW27FPX
DOCUMENT CREATED IN JAPAN, June, 2004

Advertisement

Table of Contents
loading

Related Manuals for Toshiba MW27FPX

Summary of Contents for Toshiba MW27FPX

  • Page 1: Service Manual

    FILE NO. 140-200424 SERVICE MANUAL COLOR TELEVISION/ VIDEO CASSETTE RECORDER/ DVD VIDEO PLAYER MW27FPX DOCUMENT CREATED IN JAPAN, June, 2004...

  • Page 2: Caution

    CAUTION THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 3: Servicing Notices On Checking

    SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, Safety is secured against an X-ray by consider- they are indicated with the labels or seals on the ing about the cathode-ray tube and the high cabinet, chassis and parts.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
  • Page 5 IMPORTANT SAFEGUARDS (CONTINUED) OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and support- ing structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
  • Page 6 IMPORTANT SAFEGUARDS (CONTINUED) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A...

  • Page 7: When Replacing Dvd Deck

    WHEN REPLACING DVD DECK [ When the removal of the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged.

  • Page 8: Tape Removal Method At No Power Supply

    TAPE REMOVAL METHOD AT NO POWER SUPPLY Remove the TV/DVD/VCR block from the main unit and the Fig. 1 below can be seen. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) Remove the screw 1 of the Deck Chassis and remove the Loading Motor. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.

  • Page 9: Parental Control Rating Level

    PARENTAL CONTROL - RATING LEVEL 4 DIGIT PASSWORD CANCELLATION If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. Turn Unit ON. Set the DVD to the Stop Mode. Check that the 'No disk' is displayed on the screen. Press and hold the 'STOP(DVD)' button on the front panel.

  • Page 10: Table Of Contents

    TABLE OF CONTENTS CAUTION ..........................A1-1 SERVICING NOTICES ON CHECKING .................. A1-2 HOW TO ORDER PARTS ....................... A1-2 IMPORTANT SAFEGUARDS ....................A1-3~A1-5 WHEN PERLACING DVD DECK .................... A1-6 TAPE REMOVAL METHOD AT NO POWER SUPPLY ............A1-7 DISC REMOVAL METHOD AT NO POWER SUPPLY ............A1-7 PARENTAL CONTROL RATING LEVEL ................

  • Page 11: General Specifications

    GENERAL SPECIFICATIONS CRT Size / Visual Size 27 inch / 676.6mmV System CRT Type Flat Deflection degree Magnetic Field BV/BH + 0.45 G / 0.18 G Color System NTSC Speaker 2 Speaker Position Front Size 1.8 x 3.9 Inch Impedance Sound Output 2.5W + 2.5W 10%(Typical)
  • Page 12 GENERAL SPECIFICATIONS Signal Video Signal Input Level 1 V p-p/75 ohm Output Level 1 V p-p/75 ohm S/N Ratio (Weighted) at DVD Mode 65dB S/N Ratio (Weighted) at VCR Mode 50dB Horizontal Resolution at DVD Mode 400 Lines Horizontal Resolution at VCR(SP)Mode 220 Lines RGB Signal Output Level...
  • Page 13 GENERAL SPECIFICATIONS G-10 On Screen Menu Display Menu Type Icon (TV/VCR) System Setup Clock Set On/Off Timer Set Auto Clock On/Off Standard Time Daylight Saving Time TV Setup Language Picture Audio Picture Preference Channel Setup TV/CATV Auto CH Memory Add/ Delete V-chip Setup Tape Setup Timer Rec Set...
  • Page 14 GENERAL SPECIFICATIONS G-11 On Screen Menu (DVD) Display Menu Type Character (DVD) Language Menu Subtitle Audio Picture TV Screen Size(4:3) OSD Display On/Off JPEG Interval Select Files Sound DRC (Dynamic Range Control) dts Decode Output(5.1ch/ 2ch) Surround On/Off Center On/Off Sub Woofer On/Off Parental Password Lock/ Un Lock...
  • Page 15 Step On/Off Timer Program(On Timer / Off Timer) Program Auto Shut Off No Signal No Operation Timer Back-up (at Power Off Mode) G-14 Remote Unit(for TOSHIBA) RC-FG Control Glow in Dark Remocon Unit Format Custom Code 40-BFh,44-BBh Power Source Voltage(D.C)
  • Page 16 GENERAL SPECIFICATIONS G-15 Features Auto Head Cleaning Auto Tracking HQ (VHS Standard High Quality) Auto Power On, Auto Play, Auto Rewind, Auto Eject VIDEO PLUS+(SHOWVIEW,G-CODE) Auto Clock Forward / Reverse Picture Search Auto CH Memory Surround Stable Sound Closed Caption TV Auto Shut off Function Index Search SQPB...
  • Page 17 GENERAL SPECIFICATIONS G-16 Accessories Owner's Manual Language English w/Guarantee Card Remote Control Unit Battery UM size x pcs UM-4 x 2 pcs OEM Brand Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer 300 ohm to 75 ohm Antenna Adapter Antenna Change Plug DC Car Cord (Center+) AC Plug Adapter...
  • Page 18 GENERAL SPECIFICATIONS G-20 Carton Master Carton Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material Double/White Dimensions W x D x H(mm) 851 x 618 x 776 Design As per Buyer's Description of Origin Drop Test Natural Dropping At 1 Corner / 3 Edges / 6 Surfaces Height (cm)

  • Page 19: Disassembly Instructions

    DISASSEMBLY INSTRUCTIONS 1-3: TV/DVD/VCR BLOCK (Refer to Fig. 1-3) 1. REMOVAL OF MECHANICAL PARTS Remove the 2 screws 1. AND P.C. BOARDS Disconnect the following connectors: 1-1: BACK CABINET (Refer to Fig. 1-1) (CP303, CP404 and CP3603). Remove the 6 screws 1. Remove the TV/DVD/VCR Block in the direction of arrow.
  • Page 20 DISASSEMBLY INSTRUCTIONS 1-5: TOP SHIELD (Refer to Fig. 1-5) 1-7: OPERATION PCB/DVD PCB/DVD DECK (Refer to Fig. 1-7) Remove the 11 screws 1. Remove the Top Shield in the direction of arrow. Make the short circuit on the position as shown Fig. 1-7 using a soldering.
  • Page 21 DISASSEMBLY INSTRUCTIONS 1-8: POWER PCB (Refer to Fig. 1-8) 1-10: VCR PCB (Refer to Fig. 1-10) Remove the 3 screws 1. Remove the screw 1. Remove the 6 screws 2. Disconnect the following connector: (CP1704). Remove the Power PCB in the direction of arrow. Remove the AV Jack Shield.

  • Page 22: Removal Of Vcr Deck Parts

    DISASSEMBLY INSTRUCTIONS NOTE 2. REMOVAL OF VCR DECK PARTS In case of the Locker R installation, check if the one 2-1: TOP BRACKET (Refer to Fig. 2-1) position of Fig. 2-3-B are correctly locked. Extend the 2 supports 1. When you install the Cassette Side R, be sure to move Slide the 2 supports 2 and remove the Top Bracket.
  • Page 23 DISASSEMBLY INSTRUCTIONS 2-6: LOADING MOTOR/WORM (Refer to Fig. 2-6-A) 2-7: TENSION ASS’Y (Refer to Fig. 2-7-B) Remove the screw 1. Turn the Pinch Roller Cam clockwise so that the Tension Remove the Loading Motor. Holder hook is set to the position of Fig. 2-7-A to move Remove the Worm.
  • Page 24 DISASSEMBLY INSTRUCTIONS NOTE [OK] Tension Connect Take care not to damage the gears of the S Reel and T Reel. Tension Band The Polyslider Washer may be remained on the back of the reel. [NG] Tension Connect Tension Band Take care not to damage the shaft. Do not touch the section “A”...
  • Page 25 DISASSEMBLY INSTRUCTIONS 2-10: CASSETTE OPENER/PINCH ROLLER BLOCK/P5 ARM ASS’Y (Refer to Fig. 2-10-A) Unlock the support 1 and remove the Cassette Opener. Remove the Pinch Roller Block and P5 Arm Ass’y. Cassette Opener Spring Position Fig. 2-11-B Pinch Roller Block 2-12: FE HEAD (RECORDER ONLY) (Refer to Fig.
  • Page 26 DISASSEMBLY INSTRUCTIONS 2-14: CAPSTAN DD UNIT (Refer to Fig. 2-14) NOTE 1. In case of the Pinch Roller Cam and Main Cam installa- Remove the Capstan Belt. Remove the screw 1. tion, install them as the circled section of Fig. 2-15-B so that the each markers are met.
  • Page 27 DISASSEMBLY INSTRUCTIONS 2-17: CLUTCH ASS’Y/RING SPRING/CLUTCH LEVER/ Cassette Guide Post CLUTCH GEAR (Refer to Fig. 2-17-A) Inclined Base S Remove the Polyslider Washer 1. Unit Inclined Base T Remove the Clutch Ass’y and Ring Spring. Unit Remove the Clutch Lever. Remove the Coupling Gear, Coupling Spring and Clutch Gear.

  • Page 28: Removal Of Dvd Deck Parts

    DISASSEMBLY INSTRUCTIONS 3. REMOVAL OF DVD DECK PARTS NOTE 1. Do not disassemble the DVD DECK PARTS except listed parts here. Minute adjustments are needed if the Main Frame Ass'y disassemble is done. If the repair is needed except listed parts, replace the DVD MECHA ASS'Y.
  • Page 29 DISASSEMBLY INSTRUCTIONS 3-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT (Refer to Fig. 3-3-A) Pulley Gear Rack Loading Remove the Loading Belt. Remove the screw 1. Main Gear Remove the 2 screws 2. Remove the Loading Motor PCB Ass'y. Main Frame Ass’y Remove the Pulley Gear.
  • Page 30 DISASSEMBLY INSTRUCTIONS 3-6: TRAVERSE HOLDER/INSULATOR (F)/INSULATOR (R) (Refer to Fig. 3-6-A) Rack Feed Ass'y Remove the Traverse Holder. Remove the 2 Insulator (F). Remove the Insulator (R). Insulator (R) Switch PCB Ass'y Main Chassis Ass'y Motor Gear Insulator (F) Main Chassis Ass'y Feed Motor Traverse Holder •...
  • Page 31 DISASSEMBLY INSTRUCTIONS Main Chassis Ass'y (Bottom Side) Check Hook Check Hook Check Hook Check Hook • Loosen the wire in the direction of the arrow. Fig. 3-7-E B3-4...

  • Page 32: Removal Of Anode Cap

    DISASSEMBLY INSTRUCTIONS 4. REMOVAL OF ANODE CAP 3. After one side is removed, pull in the opposite direction to remove the other. Read the following NOTED items before starting work. NOTE After turning the power off there might still be a potential Take care not to damage the Rubber Cap.

  • Page 33: Removal And Installation Of Flat Package Ic

    DISASSEMBLY INSTRUCTIONS 5. REMOVAL AND INSTALLATION OF FLAT 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using PACKAGE IC a tweezers and remove the IC by moving with the IC REMOVAL desoldering machine.
  • Page 34 DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thin- 1. Take care of the polarity of new IC and then install the tip Soldering Iron. (Refer to Fig. 5-8.) new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily.

  • Page 35: Key To Abbreviations

    KEY TO ABBREVIATIONS Audio/Control H.P.F High Pass Filter Automatic Color Control H.SW Head Switch Audio Erase Hertz Automatic Frequency Control Integrated Circuit Automatic Fine Tuning Intermediate Frequency AFT DET Automatic Fine Tuning Detect Indicator Automatic Gain Control Inverter Amplifier Killer Antenna Left A.PB...
  • Page 36 KEY TO ABBREVIATIONS Serial Strobe Switch SYNC Synchronization SYNC SEP Sync Separator, Separation Transistor TRAC Tracking TRICK PB Trick Playback Test Point UNREG Unregulated Volt Voltage Controlled Oscillator Video Intermediate Frequency Vertical Pulse, Voltage Display V.PB Video Playback Variable Resistor V.REC Video Recording Visual Search Fast Forward...

  • Page 37: Service Mode List

    SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on the remote control for more than a standard time (second).

  • Page 38: Preventive Checks And Service Intervals

    PREVENTIVE CHECKS AND SERVICE INTERVALS The following standard table depends on environmental conditions and usage. Parts replacing time does not mean the life span for individual parts. Also, long term storage or misuse may cause transformation and aging of rubber parts. The following list means standard hours, so the checking hours depends on the conditions.
  • Page 39 PREVENTIVE CHECKS AND SERVICE INTERVALS CLEANING NOTE 2. TAPE RUNNING SYSTEM After cleaning the heads with isopropyl alcohol, do not When cleaning the tape transport system, use the run a tape until the heads dry completely. If the heads gauze moistened with isopropyl alcohol. are not completely dry and alcohol gets on the tape, 3.

  • Page 40: When Replacing Eeprom (Memory) Ic

    WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: No need setting for the position of the mark @ due to the adjustment value. No need setting for after INI 63 due to the adjustment value.

  • Page 41: Servicing Fixtures And Tools

    SERVICING FIXTURES AND TOOLS Alignment Tape Back tension cassette gauge Torque cassette gauge Taper nut driver (KT-300NR) ST-N5 ST-NF 70909103 70909199 70909228 VTR cleaning kit VTR lubrication kit Grease JG002B Adapter JG002E Dial Torque Gauge (10~90gf•cm) JG002F (60~600gf•cm) JG022 Master Plane JG024A Reel Disk Height JG153 X Value Adjustment JG185 Tentelometer...

  • Page 42: Mechanical Adjustments

    MECHANICAL ADJUSTMENTS 1-2: CONFIRMATION AND ADJUSTMENT OF TENSION 1. CONFIRMATION AND ADJUSTMENT POST POSITION Read the following NOTES before starting work. Set to the PLAY mode. • Place an object which weighs between 450g~500g on the Adjust the adjusting section for the Tension Arm position Cassette Tape to keep it steady when you want to make so that the Tension Arm top is within the standard line of the tape run without the Cassette Holder.
  • Page 43 MECHANICAL ADJUSTMENTS 1-4: CONFIRMATION OF VSR TORQUE NOTE Install the Torque Gauge (JG002F) and Adapter (JG002B) If the torque is out of the range, replace the following parts. on the S Reel. Set to the Picture Search (Rewind) mode. Check item Replacement Part (Refer to Fig.1-4-B) Then, confirm that it indicates 120~180gf•cm.
  • Page 44 MECHANICAL ADJUSTMENTS 2-2: CONFIRMATION AND ADJUSTMENT OF AUDIO/ 2-3: TAPE RUNNING ADJUSTMENT CONTROL HEAD (X VALUE ADJUSTMENT) When the Tape Running Mechanism does not work well, Confirm and adjust the height of the Reel Disk. adjust the following items. (Refer to item 1-1) Confirm and adjust the position of the Tension Post.
  • Page 45 MECHANICAL ADJUSTMENTS 3. MECHANISM ADJUSTMENT PARTS LOCATION GUIDE 1. Tension Connect P4 Post 2. Tension Arm T Brake Spring 3. Guide Roller T Reel 4. Audio/Control Head S Reel 5. X value adjustment driver hole Adjusting section for the Tension Arm position D2-4...

  • Page 46: Electrical Adjustments

    ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL FUNCTION FUNCTION OSD H R.BIAS ADJUSTMENTS CUT OFF G.BIAS H.POSI B.BIAS Read and perform these adjustments when repairing the V.POSI R/G.DRV circuits or replacing electrical parts or PCB assemblies. H.SIZE B/G.DRV V.SIZE R-Y GAIN CAUTION V.LIN R-Y PHASE V-EHT...
  • Page 47 ELECTRICAL ADJUSTMENTS (TV SECTION) 2-7: HORIZONTAL SIZE Receive the monoscope pattern. 2-2: CONSTANT VOLTAGE Using the remote control, set the brightness and contrast Set condition is AV MODE without signal. to normal position. Using the remote control, set the brightness and contrast to Activate the adjustment mode display of Fig.

  • Page 48: Dvd

    ELECTRICAL ADJUSTMENTS 2-12: CENTER PARABOLA 2-16: TOP CORNER Receive the crosshatch signal from the Pattern Generator. Receive the crosshatch signal from the Pattern Generator. Using the remote control, set the brightness and contrast Using the remote control, set the brightness and contrast to normal position.
  • Page 49 ELECTRICAL ADJUSTMENTS 2-20: TINT White 0% Receive the color bar pattern. (RF Input) Using the remote control, set the brightness, contrast, color and tint to normal position. Connect the oscilloscope to TP806. Activate the adjustment mode display of Fig. 1-1 and 100% press the channel button (43) on the remote control to select "TNT".

  • Page 50: Purity And Convergence

    ELECTRICAL ADJUSTMENTS PURITY AND CONVERGENCE 3-3: STATIC CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 3-2. NOTE Receive the crosshatch pattern from the color bar Turn the unit on and let it warm up for at least 30 generator. minutes before performing the following adjustments.
  • Page 51 ELECTRICAL ADJUSTMENTS 2. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CD801 CP808B CP804 CD853 CP852 CP853B J801 CP801 CRT PCB CP851B CP803 CP802B VM COIL PCB CD602 AC IN CP602 CD603 CD3601 CD601 CP406 CP851A CP401 CP402 CP808A FB401 S3601 TP401 R430 CP404...
  • Page 52 DVD BLOCK DIAGRAM FLASH 8M SDRAM 64M IC4005 IC4007 HY57V641620HGT-7 SST39VF800A70-4C-EK-D HD0 ∼H120 SDA0 ∼SDA11 DVD LOADER HA0∼HA20 SDD0 ∼SDD15 REGULATOR RFA_SDEN,DATA,SCLK A,B,C,D,E,F CD4002 AAF_CE,FE,TE,PI READ CHANNEL GND(D) FNN,FNP GND(D) IC2601 Pick up CD,DVD,LD VBIASS0,S1 GND(M) ZR36708TQC MPEG Decoder P.CON+9V DEFECT,LINK,MIRR,LDON P.CON+A5V Spindle Moter...

  • Page 53: Y/C/Audio/Head Amp

    Y/C/AUDIO/HEAD AMP BLOCK DIAGRAM X4501 3.578545M Hz Y/C/AUDIO/CCD/HEAD AMP IC Q4507 IC4501 Q4509 LA71206M-MPB BUFFER REGULATOR P. CON + 5V BUFFER PULL VX01 Y/C_CS SERIAL VCR MICON DRIVER Y/C_DATA TIMMING CLAMP DECODER Y/C_CLK H.SW DETAL EMPHA FM-EQ CLAMP CP4501 CONV C-LPF EP/LP-CH2 (L) Y-LPF...
  • Page 54 VCR MICON BLOCK DIAGRAM SYSCON/TIMER/SERVO IN/OUT IC101 OEC8077A TV_POWER_H IN/OUT VCR_A_MUTE VCR_POWER_H VCR_POWER_ON-H Q114 V.REC_ST_H REGULATOR TV_POWER_ON-H 56 POWER FAIL POWER_FAIL BUFFER CVIN HI-FI/ AV_SW AV_SW1 HIFI ENV 88 HIFI_ENV DEMODULATOR AV_SW2 Q116 COMB FILTER HIFI H.SW 26 HIFI_H.SW AV_SW2 ST SELECT 87 ST_SELECT IN/OUT...
  • Page 55 IN/OUT BLOCK DIAGRAM Q4205 Q4204 STOP/EJECT EXT_A_MUTE MUTE SW MUTE SW VCR_A_MUTE VCR MICON PLAY CP2201 EXT_MUTE REAR OUT JACK J4202 Q4211 OPRATION KEY-B MUTE SW AUDIO_OUT_R REC/OTR HI-FI/ Q4203 DEMODULATOR HEADPHONE JACK CH.DOWN MUTE SW AUDIO_OUT_L J2201 KEY_A CH.UP KEY_B SOUND_R+ SOUND_L+...

  • Page 56: Tv/Operation

    CHROMA/PROGRESSIVE/PIN CUSHION BLOCK DIAGRM DVD_Y DVD_U REGULATIR DVD_V CHROMA IC PROGRESSIVE IC P.CON+12V IC601 IC603 TA1360ANG X601 TA1270BFG 3.579545MHz Y1 IN DEF/DAC VCC XTAL Cb1/Pb1 IN RGB VCC C IN SW_C Cr1/Pr1 IN Y/C VCC Q605 CP603 Q604 fsc OUT Y2 IN COMB FILTER SW_Y...
  • Page 57 SOUND AMP/TV MICON BLOCK DIAGRAM SOUND AMP IC IC351 AN7522N 12 4 SOUND+B SOUND_R+ REGULATOR SOUND GND SOUND_L+ IN/OUT SP_OUT_L TV_POWER_H SP_OUT_R Q350 TV_A_MUTE MUTH SW SPEAKER VCR MICON SP351 SPEAKER SP352 18 17 SURROUND IC301 AN5891SA-EIV Q354 AUDIO_OUT_L P.CON+5V AV SW HI-FI/ REGULATOR...
  • Page 58 Hi-Fi/DEMODULATOR BLOCK DIAGRM HI-FI AUDIO/H.AMP/DEM IC IC5501 AN3663FBP MIXER IC IC8004 NJM4580M(TE1) DVD_AUDIO_L REGULATOR DVD_AUDIO_R INPUT SW FRONT_A_IN_R FRONT_A_IN_L REAR_A_IN_R IN/OUT REAR_A_IN_L HF_COM OUTPUT AUDIO_OUT_R AUDIO_OUT_L Y/C/AUDIO/CCD R CH AUDIO SW /HEAD AMP IC5503 NJM2533V AUDIO_OUT_L SOUND AMP/ TV MICON AUDIO_OUT_R VCO-FO L CH AUDIO SW...
  • Page 59 COMB FILTER BLOCK DIAGRAM P.CON+5V REGULATOR COMB_FSC CHROMA/ P.CON+9V SW_Y PROGRESSIVE/ PIN CUSHION TUNER+30V DIGITAL COMB FILTER SW_C IC1501 TC90A45F Q1502 BUFFER C SW IC1503 NJM2533V Q1503 BUFFER S_C_IN IN/OUT S_Y_IN Q1501 Y/C/AUDIO/ BUFFER Y/C_VIDEO HEAD AMP Y SW IC1504 NJM2533V Y/C/AUDIO/ TUNER VIDEO...
  • Page 60 REGULATOR BLOCK DIAGRAM MOTOR_GND VCR MICON POWER_FAIL P.CON+9V OUT MOTOR+12V IC3006 KIA278R09PI Q3010 CD3001 +B_DOWN +B_DOWN_SW POWER_FAIL TUNER+30V MOTOR_GND COMB LILTER P.CON+5V MOTOR+12V P.CON+9V OPERATION UNREG+5V UNREG+8V P.CON+9V_D OUT P.CON+5V OUT AT+30V IC3002 KIA278R09PI IC3003 KIA278R05PI SOUND_GND SUND+B AT+5.6V P.CON+5V VCR MICON VCR_POWER TV_POWER_H...
  • Page 61 TV/OPERATION BLOCK DIAGRAM Q1709 CP1704 +B CONT +B_DOWN L3601 D1701, D1705 DEGAUSS COIL POWER_FAIL D1706, D1708 D1710, D1711 MOTOR_GND D1714, D1725 F3601 MOTOR+12V TRANSFORMER CD3601 UNREG+5V SWITCHING REGULATOR UNREG+8V T1701 AT+30V SOUND_GND SUND+B FEED BACK AT+5.6V +5.6 REG. IC1701 PS2561AL-1-1-V(W) Q1703 Q1701 Q1705, 6...

  • Page 62: Printed Circuit Boards Dvd

    PRINTED CIRCUIT BOARDS DVD (TOP SIDE) DVD (BOTTOM SIDE) CP2603 R2651 CP2601 CP2602 R2650 HS2301 D2601 Q2604 Q2603 Q2605 R2647 IC2301 Q2602 R2615 R2623 R2620 R2616 R2622 R2604 R2331 IC2601 R2324 R2617 C2610 W863 C2612 C2613 R2609 C2616 R4061 C2622 R2645 MOTOR R2646...

  • Page 63: Vcr

    PRINTED CIRCUIT BOARDS VCR/CRT (INSERTED PARTS) SOLDER SIDE D107 CP2201 R101 C3026 CC3001 C3030 R173 REGULATOR CP8002 C644 W017 W014 C126 C3008 R3009 IC3005 R3012 W082 W015 CD3001 D2206 R8020 R3027 C122 W081 C8005 W151 W203 D3002 Q3005 R8008 W201 IC3006 W150 DVD AUDIO...
  • Page 64 PRINTED CIRCUIT BOARDS VCR (CHIP MOUNTED PARTS) SOLDER SIDE VMD332A R359 Q353 Q354 Q350 R8005 R5508 R4203 IC4201 R5513 IC5502 Q4203 R5515 IC301 Q4211 R4217 IC199 IC6399 IC5503 Q4212 R4504 IC6300 R1501 Q1503 IC1501 R1510 Q1502 R4513 R4530 R1522 IC6301 Q1501 Q4507 Q4210...

  • Page 65: Deflection/Crt/Vm Coil

    PRINTED CIRCUIT BOARDS DEFLECTION/CRT/VM COIL SOLDER SIDE PIECE CRITIQUE VOIR AU VERSO. INFORMATION POUR SERVICE DES C437 ATTENTION R401 X-RAY CD851 R403 CP851A CP401 R454 R450 W839 W830 D403 D411 D402 CP406 D408 W025 W807 R479 R437 R438 R405 R484 D417 Q407 V.OUT...
  • Page 66 PRINTED CIRCUIT BOARDS OPERATION/POWER LOADING MOTOR (INSERTED PARTS) SOLDER SIDE SOLDER SIDE SOLDER SIDE D1702 CP1704 D1735 D1731 CD2301 SW2258 W012 W009 W010 Q1709 W011 C1717 R1726 R1727 Q1703 R1709 R1703 SUB_POWER R1723 R1734 W808 M2601 M2602 R1719 C1720 C1716 D1722 R1712 R1707...
  • Page 67 MPEG/MICON/DSP SCHEMATIC DIAGRAM C4038 (DVD PCB) 0.01 B FROM/TO AUDIO/VIDEO D4001 MCL4148 DUPTD1 SYS_MUTE JG001 UNREG+3.8V LEVEL_CONVERT DAC_VIDEO_A JG002 Q4004 DAC_VIDEO_C KTC3875S_Y_RTK DAC_VIDEO_B JG003 BOOT2 R4002 75 +-1% C4088 DAC_VIDEO_D JG004 BOOT1 0.01 B ASDATA0 R4003 75 +-1% JG005 R4052 ABCLK DUPTD1 R4004...
  • Page 68 MEMORY SCHEMATIC DIAGRAM (DVD PCB) FLASH IC 8M FROM/TO MPEG/MICON/DSP IC4007 SST39VF800A-70-4C-EK-D HA16 HA15 SD_A0 SD_A1 C4064 SD_A2 HA14 VCCQ SD_A3 0.1 F 64M SDRAM IC SD_A4 SD_A5 HA13 IC4005 HY57V641620HGT-7 SD_A6 SD_A7 SD_A8 HD15 HA12 DQ15 SD_A9 SD_D15 SD_D0 DQ15 SD_A10 C4050...
  • Page 69 RF AMP SCHEMATIC DIAGRAM (DVD PCB) FROM/TO MPEG/MICON/DSP TOUT_SW TIN_SW RFA_SDEN RFA_DATA RFA_SCLK AAF_CE AAF_FE FROM/TO LODER AAF_TE R2620 AAF_PI VR DVD CTL CP2601 VR_SEL Q2603 4.7K 09-5000-024-001-001 R2647 2SK3018 VR CD CTL JG023 JG024 VBIASS0 4.7K Q2604 R2623 VBIASS1 VR SEL CTL 2SK3018 DEFECT...
  • Page 70 AUDIO/VIDEO SCHEMATIC DIAGRAM (DVD PCB) P.CON+A5V DAC_A_VIDEO DAC_C_VIDEO C8115 DAC_VIDEO_A VIDEO_BUFFER 12P CH DAC_B_VIDEO Q8105 L8105 KTA1504S_Y_RTK FROM/TO MPEG/MICON/DSP DAC_D_DVD_VIDEO 0305 P.CON+A5V DAC_VIDEO_A C8105 CVBS DAC_VIDEO_C DAC_VIDEO_C VIDEO_BUFFER 12P CH DAC_VIDEO_B Q8102 L8102 KTA1504S_Y_RTK DAC_VIDEO_D P.CON+5V 0305 RESET VIDEO_BUFFER Q8103 CVBS CVBS CVBS C8108...
  • Page 71 Y/C/AUDIO/HEAD AMP SCHEMATIC DIAGRAM (VCR PCB) BUFFER Q4507 2SC2412K R4537 1.8K 1/4W C4519 0.1 B FROM/TO HI-FI/DVD AUDIO NORMAL_A C4558 Y/C_AUDIO FROM/TO VCR MICON C4555 6.3V R4544 0.1 B C4561 Y/C_CLK HF_COM Y/C_DATA 680K 0.01 B Y/C_CS C4559 H.SW Y/C/AUDIO/HEAD AMP IC VIDEO_OUT IC4501 FROM/TO CYL...
  • Page 72 VCR MICON SCHEMATIC DIAGRAM (VCR PCB) D109 D107 SB140-EIC SB140-EIC FROM/TO REGULATOR C133 AT+5.6V DVD_H 0.1 B VCR_POWER_H C148 C151 C167 MOTOR+12V 27P CH 0.1 F P.CON+5V 47P CH DVD_RESET R177 2.2K C126 AT+5V R129 MOTOR_GND C125 FROM/TO IN/OUT POWER_FAIL 0.1 B TV_POWER_H KEY_B...
  • Page 73 REGULATOR SCHEMATIC DIAGRAM (VCR PCB) FROM/TO TV MICON P.CON+9V OUT IC P.CON+5V OUT IC IC3006 KIA278R09PI P.CON+5V IC3003 KIA278R05PI FROM/TO DIGITAL COMB/TUNER FROM/TO TV POWER CD3001 (CP1704) P.CON+5V CU2C2001 R3022 P.CON+9V Q3005 +B_DOWN KTD863_Y TUNER+30V 12.5 POWER_FAIL POWER_FAIL R3014 R3027 VCR_POWER_H 11.5 MOTOR_GND...
  • Page 74 IN/OUT SCHEMATIC DIAGRAM (VCR PCB) FROM/TO OPERATION CP2201 (CD2251) A2001WV2-2P D2202 KEY_B KEY-B MTZJ6.8B FROM/TO SOUND AMP/SURROUND COAXIAL J8007 SOUND_R+ MSP-251V-05NI-FE-LF SOUND_L+ B8001 W4BRH3.5X6X1.0X2 C8010 R8004 SP_OUT_R SP_OUT_L 0.1 F R8007 SPDIF-134 D AUDIO DRIVER 1.8K Q8002 FROM/TO REGULATOR 2SC2412K SOUND_GND L8002 P.CON+5V...
  • Page 75 SOUND AMP/SURROUND SCHEMATIC DIAGRAM (VCR PCB) SOUND AMP IC IC351 AN7522N 10.6 HS33V6 HS351 C335 763WAA0255 0.001 W828 FROM/TO IN/OUT W859 SOUND_R+ W843 FROM/TO REGULATOR SOUND_L+ SP_OUT_R R356 SOUND+B SP_OUT_L 100K 1/4W C358 SOUND_GND 0.0027 B W845 C302 R301 MUTE SW 0.0027 B ZERO Q353...
  • Page 76 Hi-Fi/DVD AUDIO SCHEMATIC DIAGRAM (VCR PCB) C5511 0.1 B C5507 R5504 0.22 3.3K DVD_AUDIO_R DVD_AUDIO_L R5523 HI-FI/AUDIO/HEAD AMP/DEM IC C5504 IC5501 AN3663FBP 0.1 B R5503 FROM/TO IN/OUT 3.9M HIFI H.SW FRONT_A_IN_L C5505 C5509 C5550 TP5502 DEM_BLK FRONT_A_IN_R ZZ-PROM LOGIC 0.015 B REAR_A_IN_L C5513 C5551...
  • Page 77 DIGITAL COMB/TUNER SCHEMATIC DIAGRAM (VCR PCB) L1502_1 220uH 0305 L1501_1 P.CON+5V 220uH 0305 R1514 COMB_FSC 2.7K FROM/TO HI-FI/DVD AUDIO TUNER_AUDIO BUFFER Q1501 2SC2412K C1514 R1505 Y/C_VIDEO 5601/4W KANP FROM/TO CHROMA/PROGRE/PIN SW_C SW_Y COMB_FSC FROM/TO Y/C/A/H.AMP BUFFER R1515 C1543 Q1503 S_C_IN 2SC2412K R1518 1.2K...
  • Page 78 CHROMA/PROGRESSIVE/PIN CUSHION SCHEMATIC DIAGRAM (VCR PCB) FROM/TO VCR MICON PROTECT FROM/TO CRT/SVM CP602 (CP802B) B2013H02-7P GND(SIGNAL) W813 CUT OFF R OUT SD-H L601 G OUT BUFFER IIC_OFF Q611 B OUT 100uH KTC3875S_Y_RTK R629 CLAMP OFF 3.3K 1/4W R668 P.CON+12V PROGRESSIVE IC IC603 TA1360ANG C665...
  • Page 79 TV MICON SCHEMATIC DIAGRAM (VCR PCB) MICON IC IC6300 OEC7109A R6322 FROM/TO CHROMA/PROGRE/PIN H.SYNC H_SYNC V.SYNC V_SYNC C6323 R6303 C6311 10P CH FROM/TO VCR MICON BLUE OSD_B C6324 4.7K 0.1 F R6304 C6313 W847 10P CH OSD CTL GREEN OSD_G C6325 4.7K 0.1 F...
  • Page 80 DEFLECTION SCHEMATIC DIAGRAM (DEFLECTION PCB) CP404 CD803 (CP803) FROM/TO DY RELAY DRIVE D3601 B06B-DVS CP83035A Q3601 TO CRT 10.9 KTC3198 V.OUTPUT 1SS133 R3603 IC401 LA78041 10K 1/4W THERMAL PROTECTION NC NC C433 C435 RY3601 ALKS321 330P 330P PUMP UP CP3603 R468_1 R471 A1561WV2-2P...
  • Page 81 CRT/SVM SCHEMATIC DIAGRAM (CRT PCB) TP804 SVM BLOCK CRT BLOCK R828 123.5 680 1/2W R816 W831 RED AMP Q801 47 1/4W D801 2SC4075D/E FROM/TO DEFLECTION 1SS133 CP851B (CP851A) FROM/TO CHROMA/PROGRE/PIN R831 B2013H02-3P R855 680 1/4W GND(SIGNAL) RED AMP 150 1/2W Q810 CUT_OFF KTC3199_Y...
  • Page 82 TV POWER SCHEMATIC DIAGRAM (POWER PCB) FROM/TO REGULATOR CP1704 (CD3001) A2001WV2-12P +B_DOWN POWER_FAIL M_GND MOTOR_GND MOTOR+12V D1719_1 B1703 31DQ06-FC W4BRH3.5X6X1.0X2 UNREG+5V UNREG+8V AT+30V SOUND_GND SOUND+B AT+5.6V C1719 R1718 CD1701 0.0022 CUU26001 0.56 10W D1723 R1736 W811 7A 250V FE201-6L49 56K 1/2W +B CONT.
  • Page 83 OPERATION SCHEMATIC DIAGRAM (OPERATION PCB) R2251 R2252 R2253 R2254 R2255 R2256 R2257 FROM/TO IN/OUT 18K 1/4W 5.6K 1/4W 3.3K 1/4W 1.8K 1/4W 1.5K 1/4W 820 1/4W 680 1/4W CD2251 (CP2201) CU220701 PCB270 KEY-B TEDB47 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE...
  • Page 84 LOADING MOTOR/SW SCHEMATIC DIAGRAM (LOADING MOTOR PCB) (SW PCB) SSS-13-2 CD2302 2H052601 ESE22MH24 CD2301 SW-2(CLOSE) 2H062102 GND(SW) GND(SW) SW-1(OPEN) PICK UP INNER LIMIT SWITCH LOADING MOTOR(+) FEED MOTOR (-) M2602 LOADING MOTOR(-) BCZ3B03 FEED MOTOR (+) M2603 SPINDLE MOTOR (-) BCZ3B52 SPINDLE MOTOR (+) M2601...
  • Page 85 INTERCONNECTION DIAGRAM CD4002_1 CP8001 WIRE CP2601 GND(D) GND(D) GND(M) MON(DVD) MON(DVD) P.CON+9V P.CON+9V NC(SW) NC(SW) DRIVE P.CON+A5V P.CON+A5V DM-3 VOL(DVD) VOL(DVD) P.CON+3.3V P.CON+3.3V GND(DVD) GND(DVD) P.CON+3.3V P.CON+3.3V LD(DVD) LD(DVD) LD(CD) LD(CD) SPDIF SPDIF VOL(CD) VOL(CD) CD8101 CP8101_4 CP8002 GND(CD) GND(CD) CVBS CVBS MON(COM)

  • Page 86: Mpeg/Micon/Dsp

    WAVEFORMS MPEG/MICON/DSP AUDIO/VIDEO Y/C/AUDIO/HEAD AMP 20µs 10ns 500µs 1.0V 1.0V 1.0V MEMORY 2µs 1.0V 200µs 500µs 1.0V 500mV RF_AMP/DSP 10µs 1.0V 200ns 500mV 200mV PROGRESSIVE OFF 5µs 200ns 2.0V 500mV 100mV 20µs 5µs 5µs 500mV 500mV The following waveforms were measured at the point of the corresponding NOTE: balloon number in the schematic diagram.

  • Page 87: Vcr Micon

    WAVEFORMS CHROMA/PROGRESSIVE/ VCR MICON PIN CUSHION 20ms 100ms 2.0V 2.0V 200mV POWER ON POWER ON Hi-Fi/DVD AUDIO 100s 2.0V 50mV POWER ON 200mV 10ms 1µs 2.0V 200mV 50mV POWER ON POWER ON DIGITAL COMB/TUNER 50µs 20µs 20µs 2.0V 0.5V 200mV POWER ON POWER ON POWER ON...

  • Page 88: Tv Micon

    WAVEFORMS 20µs 20µs 500ns 1.0V 1.0V 1.0V POWER ON POWER ON POWER ON 20µs 500ns 1µs 1.0V 1.0V 50mV POWER ON POWER ON POWER ON 20µs 50ns 1.0V 1.0V 1.0V POWER ON POWER ON POWER ON TV MICON 20µs 500ns 1.0V 1.0V POWER ON...

  • Page 89: Mechanical Exploded Views

    MECHANICAL EXPLODED VIEW 102B 102B 102A PCB110 (CRT PCB ASS'Y) 102B PCBD80 (VM COIL PCB ASS'Y) 101C 101N 101P 101D 101O 101L 101K 101P 101G 101P 101M 101B 101P 101F 101E 101I 101H 101L 101M 101J 101A I1-1...
  • Page 90 MECHANICAL EXPLODED VIEW PCB080 (DEFLECTION PCB ASS'Y) PCB010 (VCR PCB ASS'Y) PCB130 (DVD PCB ASS'Y) PCB270 (OPERATION PCB ASS'Y) PCB240 (POWER PCB ASS'Y) I1-2...
  • Page 91 MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) 141, 142, 143, 144, BL001, TM101 I1-3...

  • Page 92: Chassis Exploded Views

    CHASSIS EXPLODED VIEW (TOP VIEW) CD1501 M2003 UN4001 H5002 H5001 CD1502 M101 NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. I2-1...
  • Page 93 CHASSIS EXPLODED VIEW (BOTTOM VIEW) M2001 CD1501 CD1502 NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. I2-2...

  • Page 94: Dvd Deck Exploded Views

    DVD DECK EXPLODED VIEW Cannot supply by a unit. M2603 PCB610 (LOADING MOTOR PCB ASS'Y) CD2302 CD2301 PCB640 CD2001 (SW PCB ASS'Y) Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more. If the repair is needed, replace the DVD MECHA ASS'Y.

  • Page 95: Mechanical Replacement Parts List

    MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE004303 7A7010021A FRONT CABI ASS'Y 101A AE004304 701WPJ1265 CABINET,FRONT 101B AE003101 711WPA0200 PLATE,FRONT 101C AE004305 712WPJ0863 FLAT,FLAP 101D AE004306 712WPJ0864 FLAP,DVD 101E AE004307 712WPJ0865 DOOR 101F AE003219 713WPA0315 GLASS,LED 101G AE003220 713WPA0316...
  • Page 96 MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AD302384 8141H60D54 SCREW,TAP TITE(P) GW22 6x45 BZ710036 8117540B04 SCREW,TAPPING(B0) TRUSS 4x20 BZ710320 8117540804 SCREW,TAPPING(B0) TRUSS BZ710582 8109130B94 SCREW,TAP TITE(B) R PAN 3x29 BZ710239 8109I30A04 SCREW,TAP TITE(B) WH7 3x10 BZ710187 8110226804 SCREW,TAP TITE(P) BIND 2.6x8...

  • Page 97: Chassis Replacement Parts List

    CHASSIS REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE004321 A5L1046420A DECK ASSY A5L1046420A AE002754 85OA400240 PINCH ROLLER BLOCK (VA) BZ710682 85OA500026 AHC ASS'Y BZ710193 85OP200290 BELT,CAPSTAN (S) BZ710515 85OP600581 WORM BZ710094 85OP500083 BASE,AC HEAD BZ710112 85OP800324 SPRING,AC HEAD BZ710516 85OA000459 MAIN CHASSIS ASS'Y...

  • Page 98: Dvd Deck Replacement Parts List

    DVD DECK REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE003533 A5M4016650 DVD MECHA ASS'Y A5M4016650 AE003534 92P100098A HOLDER,TRAVERSE AE003550 92P100094A CLAMPER AE003551 92P100088A GEAR,MOTOR AE003537 92AAA0013A FEED RACK ASS'Y AE003538 92P200013A INSULATOR(F) AE003539 92P200014A INSULATOR(R) AE004323 92SBB0019A LOADER SUB ASS'Y AE003541 92P100095A...

  • Page 99: Electrical Replacement Parts List

    ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description RESISTORS ! R401 BZ210258 R4X5T6472F R,METAL 4.7K OHM 1/6W ! R403 BZ210105 R4X5T6183F R,METAL 18K OHM 1/6W ! R405 BZ210231 R4X5T6153F R,METAL 15K OHM 1/6W ! R406 AD301385 R3X18A391J R,METAL OXIDE 390 OHM 2W ! R408...
  • Page 100 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES D001 BZ410037 D97U03301B DIODE,ZENER MTZJ33B T-77 D101 AD301638 0010E00330 INFRARED LED LTE-3271T-012A-O D102 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D103 BZ410022 D97U06R81B DIODE,ZENER MTZJ6.8B T-77 D105 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D106 AD300070 D97U01201B...
  • Page 101 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES ! D1723 AD301980 D2CF2016L0 DIODE,SILICON FE201-6L49 D1724 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 ! D1725 BZ410062 D2WTRM11C0 DIODE,SILICON RM11C-EIC D1726 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D1727 AE003870 D97U04R31B DIODE,ZENER MTZJ4.3B T-77 D1728 BZ410006 D1VT001330...
  • Page 102 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q101 BZ410097 0000M00390 PHOTO TRANSISTOR ST-304L Q102 BZ510067 TNAAC05002 COMPOUND TRANSISTOR KRC103SRTK Q103 BZ410097 0000M00390 PHOTO TRANSISTOR ST-304L Q104 BZ410106 0002700680 PHOTO COUPLER RPI-352C40N Q105 BZ410106 0002700680 PHOTO COUPLER RPI-352C40N Q106 BZ510021...
  • Page 103 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q1709 BZ510087 TCAT032070 TRANSISTOR,SILICON KTC3207-AT Q2201 BZ510071 TNAAB05003 COMPOUND TRANSISTOR KRC102SRTK Q2202 BZ510071 TNAAB05003 COMPOUND TRANSISTOR KRC102SRTK Q2203 BZ510071 TNAAB05003 COMPOUND TRANSISTOR KRC102SRTK Q2601 AE003592 T67J048TL0 TRANSISTOR,SILICON 2SA2048TL Q2602 AE003592 T67J048TL0...
  • Page 104 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description COILS &TRANSFORMERS L4001 BZ310191 02167F2R2J COIL 2.2 UH L4002 BZ310118 02AHB9A972 CORE,FERRITE W5T29X7.5X19 L4201 BZ310041 02167F101J COIL 100 UH L4202 BZ310041 02167F101J COIL 100 UH L4205 BZ310041 02167F101J COIL 100 UH L4501 BZ310039...
  • Page 105 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS B2601 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04 B2602 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04 B2603 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04 B2604 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04 B2605 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04 B3001 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0 B4001...
  • Page 106 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS EL0801 BZ614043 124116281A EYE LET XRY16X28BD EL0802 BZ614044 124120301A EYE LET XRY20X30BD EL1101 BZ614043 124116281A EYE LET XRY16X28BD EL1102 BZ614044 124120301A EYE LET XRY20X30BD EL2401 BZ614043 124116281A EYE LET XRY16X28BD EL2402 BZ614044...
  • Page 107 TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN...

Table of Contents