Simon Xti Features - GE Simon XTi User Manual

Simon XTi features

The Simon XTi features provide you with the ability to perform the following functions:
• Arm perimeter (doors and windows) and interior (motion) sensors to indicate
intruders.
• Use the emergency screen to send quick response alerts to the central monitoring
station.
• Access the system from a key fob (similar to the one used for your car).
• Access the system from a remote telephone.
• Disable sensors so you can leave a window open while the system is armed.
• Get an audio alert when a protected door is opened while the system is disarmed.
• Get an audio alert if movement of a protected asset is detected (group 43).
Cross-zoning
Cross zoning (two-trip) refers to two different motion sensors that must be tripped
within two minutes of each other to report an alarm to the central station. Figure 2 on
page 7 shows the path of a person walking from the kitchen to the living room. When
the person is detected walking through the kitchen, the motion sensor in the kitchen
is tripped, sounding a local alarm. If motion is detected by the living room motion
sensor within two minutes, an alarm report will be sent to the central station.
Note: Contact your installer for more information.
6
Depending on the current arming state of your machine, one of these icons
will be displayed. Press the ARM icon to access the Arming Screen. Press a
DISARM icon, and provide a valid access code, to disarm your system.
Note: When disarming the system, only intrusion/burglary sensors are
disarmed. Environmental sensors, such as smoke and carbon monoxide
detectors, stay active at all times.
Note: Depending on your configuration, the Motions Only icon may not
appear.
Press to access the settings screen.
Simon XTi User Manual