Listening To Music With Connected Components; Playing Back The Music Of Connected Components; Playing A Component Connected To The Optical In Jack; Playing A Component Connected To The Line In Jack - Sony CMT-SX7 Operating Instructions Manual

Listening to music with connected
components
Playing back the
music of connected
components
You can listen to a track of connected
components through external output
connected to the unit.
Note
 Beforehand, press  – to turn down the
volume.
 The system may enter Standby mode
automatically if the volume level of the
connected component is too low. For details, see
"Setting the Automatic Standby function"
(page 29).
Playing a component
connected to the OPTICAL
IN jack
1
Press FUNCTION to select
"OPTICAL IN."
2
Connect an optical cable to the
OPTICAL IN (external input) jack
on the rear of the unit and the
output terminal of the optional
external equipment.
3
Start playback of the connected
component.
Adjust the volume on the connected
component during playback.

4
Press +/– to adjust the
volume.
Note
 The OPTICAL IN jack is not compatible with a
format other than PCM. Set the output format of
the connected component to PCM.
Playing a component
connected to the LINE IN
jack
1
Press FUNCTION to select "LINE
IN."
2
Connect its audio connecting
cord to the LINE IN (external
input) jack on the rear of the unit
and the output terminal of the
optional external equipment.
3
Start playback of the connected
component.
Adjust the volume on the connected
component during playback.

4
Press +/– to adjust the
volume.
21 GB