Door Seal; Ventilation Gaps - Miele K 34472 iD Operating And Installation Instructions

 Clean the condensate channel and
drain hole frequently so that conden‐
sate can drain away unhindered. Use
a straw or similar to clear the drain if
necessary.
To do this, remove the PerfectFresh
zone compartments.
Be careful not to wash out the spe‐
cial lubricant in the telescopic run‐
ners during cleaning.
 The PerfectFresh zone compartments
are on telescopic runners. Clean the
telescopic runners with a damp cloth.
 Miele stainless steel conditioning
agent can be used to remove any
soiling from the stainless steel trim.
Tip: It is important to treat the stainless
steel trim with Miele stainless steel con‐
ditioning agent each time it is cleaned.
This will protect the surface and help
prevent re-soiling.
 Leave the door open to air the appli‐
ance for a short while and to prevent
odours building up.
Cleaning and care

Door seal

Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned reg‐
ularly with clean water, and then wi‐
ped dry with a soft cloth.

Ventilation gaps

 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner.
A build-up of dust will increase the
energy consumption of the appliance.
45