Connections - Panasonic TH-80LFB70U Operating Instructions Manual

Connections

AC cord connection and ¿ xing, cable ¿ xing
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)
1 Attach the clamper
Insert the clamper
in a hole.
AC cord ¿ xing
To remove from the unit:
hole
Keep pushing
both side snaps
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
2 Bundle the cables
snaps
hooks
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿ rst.
To loosen:
Set the
knob
tip in the
hooks
Keep
pushing
the knob
11