Do Not Disturb; Remote Control - Sony SmartBand 2 SWR12 User Manual

To turn on the Out-of-range alert notification function
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2
Tap Get notified, then drag the slider beside Out-of-range alert to the on
position.

Do not disturb

You can turn on the Do not disturb function if you do not want to be interrupted by
notifications. When the Do not disturb function is enabled, only the Smart wake up
alarm is active.
To turn on the Do not disturb function
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2
Tap Get notified > Do not disturb, then drag the slider beside Off to the on
position.
To set the Do not disturb interval
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2 Tap Get notified > Do not disturb, then drag the slider beside Off to the on
position.
3 Tap Start time and select the relevant values for the hour and minute, then tap
OK.
4
Tap End time and select the relevant values for the hour and minute, then tap
OK.

Remote control

You can use your SmartBand 2 to control media playback and the Find phone
application on the connected Android™ device. You can select which application you
want to control using the SmartBand 2. If you select a media application, you can
manage media playback on the Android™ device. If you select the Find phone
application, you can make your Android™ device ring loudly.
The three notification lights on the SmartBand 2 are blue when you are using it as a remote
control.
To turn on the remote control function
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2
Tap Remote control, then drag the slider beside Off to the on position.
To select which application can be used with remote control
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Settings.
2
Tap Remote control, then drag the slider beside Off to the on position.
3
Tap Active application, then select an application as desired.
This is an Internet version of this publication. © Print only for private use.
13