Connect The Power Cord And Other Cables To The Projector - Epson BrightLink 475Wi Installation Manual

I

Connect the power cord and other cables to the projector

Connect any necessary cables such as the computer cable, HDMI cable, USB cable, Touch Unit
connection cable, Control Pad cables, and power cord to the projector. See your projector's User Guide
for detailed connection information.
Computer
cable
USB cable
Connect the power cord last.
BrightLink 595Wi/595Wi+: When connecting to the Audio1, Audio2, and Computer1
ports, it is recommended that you connect the cables to the ports in the following
order: Audio1, Audio2, and then Computer1.
BrightLink Pro 1420Wi/1430Wi: When connecting to the Audio1, Audio Out, and
Computer1 ports, it is recommended that you connect the cables to the ports in the
following order: Audio1, Audio Out, and then Computer1.
If you are planning to run the cables inside the wall, make sure you follow all local electrical codes. If
you are running the cables outside the wall, use a cable management system to keep the cables from
obstructing the image. An optional cable management system is available from Epson (part #
ELPCK01).
Power cord
Touch Unit
connection cable
40