Advertisement

User manual
EN
Dishwasher
ZDF11001WA

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZDF11001WA

  • Page 1 User manual Dishwasher ZDF11001WA...
  • Page 2: Table Of Contents

    • The appliance is to be connected to the wa- Electrical connection ter mains using the new supplied hose-sets. Warning! Risk of fire and electrical shock. Old hose sets must not be reused. • The appliance must be earthed. www.zanussi.com...
  • Page 3: Control Panel

    • Dishwasher detergents are dangerous. Obey PNC : the safety instructions on the detergent pack- Serial Number : aging. • Do not drink and play with the water in the appliance. Control panel Indicators On/off indicator Programme marker Start button www.zanussi.com...
  • Page 4: Programmes

    Do not use detergent with this programme. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. www.zanussi.com...
  • Page 5: Options

    How to adjust the level of the water the knob counterclockwise until the pro- softener gramme marker is aligned with 1. Make sure that the programme marker on 3. Release when start to flash. the knob is aligned with www.zanussi.com...
  • Page 6: Daily Use

    • If the rinse aid indicator is on, fill the rinse Set the correct programme for the type of aid dispenser. load and the degree of soil. 3. Load the baskets. www.zanussi.com...
  • Page 7: The Appliance

    If you do not deactivate the appliance within rinse aid dispenser are full. 5 minutes all indicators goes off. This helps to 3. Start the shortest programme with a rinsing decrease energy consumption. phase, without detergent and without dishes. www.zanussi.com...
  • Page 8: Hints And Tips

    • The correct quantity of detergent is used. Refer to the supplied leaflet with examples • There is dishwasher salt and rinse aid (unless of the load of the baskets. you use combi detergent tablets). • The cap of the salt container is tight. www.zanussi.com...
  • Page 9: Care And Cleaning

    Internal cleaning If you regularly use short duration programmes, these can leave deposits of grease and lime- scale inside the appliance. To prevent this, we recommend to run long du- ration programmes at least 2 times per month. www.zanussi.com...
  • Page 10: Troubleshooting

    • The released quantity of rinse aid is too If the problem occurs again, contact the Serv- much. Adjust the rinse aid selector to a lower ice. position. If other alarm codes show, contact the Service. • The quantity of detergent is too much. www.zanussi.com...
  • Page 11: Technical Information

    Help protect the environment and human health • Discard correctly the packaging material. Re- and to recycle waste of electrical and electronic cycle the materials with the symbol appliances. Do not dispose appliances marked www.zanussi.com...
  • Page 12 www.zanussi.com/shop...

Table of Contents