Water Inlet Connection A3 - Sharp ES-FDD9144A0-EN User Manual

Water inlet connection
• Operate your machine with cold water
only.
o
Use only the new water inlet hoses
given with your machine or purchased
Ct
jJ
,1
through authorized dealers. '
~i
• 1
gasket is included in the hose packaging to prevent water
leaks in connections. Fit this gasket to the end of new water inlet
hose on the side of faucet.
• ... c.
onnect the other end of the water inlet )~.
hose to a
3/4"
water tap with threads.
;0'
ICt1 .
;~~~t~~:~~stic parts on the hose using
.t~<-l
• In uncertain conditions, have the con- ,/ ~/7
nection works done by a qualified plum-
ber.
• Ensure that polnts of contact do not leak after you have made
the connections.
• Flow of water with pressure of 0.1-1 Mpa will allow your machi-
ne to operate more effiCiently
(0.1
Mpa pressure means that more
than 8litres of water will flow through a fully-opened faucet per
minute).
• Ensure that the new water inlet hoses are not bent. broken,
crushed or resized.
m@