Brother DCP-385C Quick Setup Manual page 2

®
Windows
For
Before you install
8
a.
Make sure that your computer is ON and you are logged on
with Administrator rights.
Important
• DO NOT connect the USB cable yet.
• Close any applications.
• Make sure there are no memory cards or a USB Flash
memory drive inserted.
• The screen may differ depending on the operating system.
b.
Click Install MFL-Pro Suite, and click Yes
if you accept the license agreements.
b. c.
Connect the USB cable to the USB Carefully guide the USB cable into the cable
socket marked with a channel and out the back of the machine.
symbol. The USB socket Connect the cable to your computer.
is inside the machine
as shown.
Connect the power cord
11
a.
Connect the power
Important
cord.
DO NOT cancel any
of the screens.
It may take a
few minutes for
installation to
complete.
The installation will continue automatically.
The installation screens appear one after another.
Install Optional Applications supported by Reallusion, Inc
13
FaceFilter Studio lets you edit your photo data
and add photo effects such as red eye reduction
or skin tone enhancement.
Important
• The computer must be connected to the
internet.
• The machine must be ON and connected to
the computer.
• Make sure you are logged on with
Administrator rights.
Install MFL-Pro Suite
9
b. a.
If you already connected USB cable
and power source, disconnect USB
cable first, then disconnect the
machine from the power socket.
Note
If the Brother screen does not
appear automatically, go to My
Computer (Computer), double-
click the CD-ROM icon, and then
double-click start.exe.
Connect the USB cable
10
c. a.
Follow the on-screen instructions Lift the scanner cover until it locks
until this screen appears: securely into the open position.
Important
• DO NOT connect the
machine to a non-powered
USB hub. Connect the
machine directly to your
computer.
• Make sure that the cable
does not restrict the cover
from closing, or an error
may occur.
Finish and restart
12
b. a.
When the Click Finish to restart your
On-Line computer.
Registration
screen appears,
make your
selection and
follow the
on-screen
instructions.
a. b. c.
Open the main menu The CD-ROM main Click the FaceFilter Studio button to install.
d.
again by ejecting menu will appear. For information on basic FaceFilter Studio functions, see
Using FaceFilter Studio for photo printing by REALLUSION
and then reinserting Choose your
the CD-ROM or by language and then in the Software User's Guide on the CD-ROM.
double-clicking the click Additional For more detailed information, see FaceFilter Studio Help.
start.exe program Applications.
Note
from the root folder.
You can also install
BookScan&Whiteboard
Suite from the main menu.
For
Before you install
8
Insert the supplied CD-ROM into your CD-ROM
drive.
Choose your language.
Install MFL-Pro Suite
10
d.
Lift the scanner cover to release
the lock a. Gently
1
push the scanner
cover support
3
down b and
2
close the
scanner
cover c.
The installation is
Finish
now complete.
Note
If an error message appears
during the software installation,
run the Installation Diagnostics
located in Start/All Programs/
Brother/DCP-XXXX (where
DCP-XXXX is your model name).
Install Presto!
11
®
Mac OS X
Connect the USB cable
9
Make sure your machine is connected to the a.
power and your Macintosh is ON. You must
®
be logged on with Administrator rights.
Important
• Make sure there are no memory cards
or a USB Flash memory drive inserted.
• For Mac OS ® X 10.2.0 to 10.2.3 users,
upgrade to Mac OS ® X 10.2.4 or greater.
(For the latest information for
Mac OS ® X, visit
http://solutions.brother.com/)
c.
Carefully guide the USB cable into the
Important
cable channel and out the back of the
• DO NOT connect the machine
machine.
to a non-powered USB hub.
d.
Connect the cable to your Macintosh ® .
Connect the machine directly
to your Macintosh
• Make sure that the cable does
not restrict the cover from
closing, or an error may occur.
a. b.
Insert the supplied CD-ROM into your Double-click the Start Here OSX icon.
CD-ROM drive.
c. d.
Click OK. For Mac OS
to 10.2.8 users,
click Add and then
choose USB.
For Mac OS ® X 10.3.x or greater users,
go to step 11.
® ®
PageManager
When Presto! PageManager is a.
® ®
Double-click the Presto! PageManager icon
installed, OCR capability is added to
and follow the on-screen instructions.
Brother ControlCenter2. With Presto! ®
PageManager , you can easily scan, share
®
and organize photos and documents.
For Mac OS X 10.2.4 to 10.3.8 users,
®
follow the on-screen instructions, and
download the software from the Brother
Solutions Center website.
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and "Bella"
(meaning "Beautiful" in Italian) and is a representation of the "innovative"
technology providing you with beautiful and long lasting print results.
b.
Lift the scanner cover until Connect the USB cable to the USB
it locks securely into the socket marked with a symbol.
open position. The USB socket is inside the
machine as shown below.
e.
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c.
1
.
®
3
2
Note
It may take a few minutes
for installation to complete.
After the installation, click
Restart.
e. f.
X 10.2.4 Choose your Quit Print Center.
®
model name, and
then click Add.
Finish
The installation is
now complete.