Panasonic Workio DP-180 Operating Instructions Manual page 55

Selecting the desired Transmission setting.
3
(See page 11)
Your machine can temporarily change the File
Type and File Name by using
(XMT File Type and Name).
6
You can select TIFF/JPEG or PDF File Type and
then change the File Name. When sending to:
Internet Fax : select "TIFF/JPEG".
PC : select "TIFF/JPEG" or "PDF".
(Gray Scale or Colour are available only when
transmitting/emailing in PDF or JPEG file type
mode. If you are sending in JPEG file type mode to
an Internet Fax, the receiving station must support
JPEG format.)
6
The document(s) is stored into
memory with a file number.
Then starts sending the
document(s).
NOTE
4. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "Valid" and the Default Domain must be pre-
programmed in the User (Internet) Parameters. (See page 144)
5. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
6. Direct Transmission is not available for LAN communication.
FUNCTION 8
7
When an original is scanned on the Platen Glass,
the message "ANOTHER ORIGINAL?" is shown.
4
COLOR COLOR
REMOTE REMOTE
COPY COPY
Place another original, then press
.
START
Machine starts sending.
5a
5b
5c
55